Toshiba Strata AirLink DK40i, Installation And Maintenance Manual

Page: 363 / 724

Universal Slot PCBs
PCB Chapter Layout
Strata DK I&M 6/00
9-19
Universal Slot PCBs
PESU Programming
Enter Code 25 in Program 03 for a non-optioned PESU or Code 26 for a PESU supporting Off-
hook Call Announce. To program the PESU standard telephone ports, see
“PESU Programming”
on Page 9-19 . To program the PESU electronic telephone ports, see “PESU Programming” on
Page 9-19 . If there are no PESU options, skip Program 03 and run Program 91 instead.
Table 9-5 PESU Controls, Indicators, and Connectors
Control/Indicator/Connector Type of Component Description
Off-hook call announce P10
10-pin connector
Interface connector for optional Off-hook Call
Announce subassembly connector (used with
P20, P40, P50, and P60).
Off-hook call announce P20 Used with P10, P40, P50, and P60.
Off-hook call announce P40 Used with P10, P20, P50, and P60.
Off-hook call announce P50 Used with P10, P20, P40, and P60.
Off-hook call announce P60 Used with P10, P20, P40, and P50.
Ring voltage jumper plug P90 3-terminal jumper
Sets ring generator voltage level for circuits 1
and 2.
H=190V P-P (factory setting)
L=130V P-P
Door phone W9 jumper wire
White jumper wire
When cut, configures PESU, circuit 5 for
installation of an optional HDCB.
BGM W7 jumper pack
When cut, configures PESU, port 07, circuit 8,
for BGM source connection (slot 01 only with
PCTU2 and PCTU1).