Toshiba Strata AirLink DK40i, Installation And Maintenance Manual

Page: 140 / 724

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
4-26
Strata DK I&M 6/00
Attendant Console Slots Required
PIOU/PIOUS/RSIU/RSSU Option Slots Required
PEPU Page Option PCB Required
System Slots Required
Cabinets Required
Important!
To determine the type of RCTU PCB required, use Table 4-9 . The total Universal
slots and features required determine the RCTU PCB needed.
➤
Enter one slot for each attendant console required (1~4 consoles maximum).
Total RATU PCB slots required
➤
Enter number of option PCBs required.
Total needed for MIS for ACD (required new)
Total needed for remote/local maintenance with DKi Admin/DKi Backup PC
Total needed for SMDI
Total needed for SMDR (existing PIOU)
Total needed for miscellaneous options (see Table 4-19 )
Total PIOU/PIOUS/RSIU/RSSU PCB slots required
Note The following subassembly PCBs do not required additional cabinet slots:
●
The IMDU subassembly plugs onto PIOU or PIOUS to provide a remote maintenance modem.
●
The RMDS subassembly plugs onto the RSIU to provide a remote maintenance modem.
●
Up to three RSIS subassemblies can plug onto RSIU to provide any option listed in this Step.
➤
Enter total number of PEPU PCBs needed. Total PEPU PCB slots required
Note PEPU provide 600-ohm interface or 3-watt page output for external page/BGM operation.
➤
List the number of slots for each of the following:
Total number of Station PCB slots required (see Page 4-23 )
Total number of CO Line PCB slots required (see Page 4-25 )
Total number of Attendant Console slots required (see Page 4-26 )
Total number of Option slots required (see Page 4-26 )
Total number of Page Option slots required (see Page 4-26 )
Total number of slots required in each cabinet for RRCU remote cabinet PCBs, Cabinets 1~7
(see)
Total system slots required
➤
Total system slots divided by 6 or 8 = Total Cabinets required