Toshiba Strata AirLink DK40i, Installation And Maintenance Manual

Page: 282 / 724

DK424i Installation
Step 4: Install AC Power Components
7-20
Strata DK I&M 6/00
BPSB240
Cabinet power strip for 208VAC or 240VAC primary power. Provides three 240VAC/20A outlets
(NEMA 6-20R) and nine ft. AC power cord with a standard 240VAC/20A plug (NEMA 6-20P).
This unit is field installed inside system cabinet side panels. The cord is rated at 16 amps. (max.).
See
Figures 7-13 ~ 7-15 .
One BPSB240 is required for two or three cabinet systems.
Two BPSB240s are required for four or more cabinet systems.
Notes
♦
Local electric codes allow only one AC power cord to be connected to the system when
using 208VAC or 240VAC as the primary AC power.
♦
If using 208VAC as primary power, the plug on the BPSB240 AC power cord
(NEMA 6-20P) may have to be changed by a certified electrician depending on local
electric codes.
BACL240A
AC208V or AC240VAC nine ft., 10 amps. (max.), power supply cord. This cord must be used
when the system is powered by 208VAC or 240VAC. One cord is required for each cabinet power
supply and must be ordered separately only if using 208VAC or 240VAC as the system primary
AC power.
Note The cord is equipped with a AC250Volt/20A plug (NEMA 6-20P) which is standard for
240VAC. If using 208VAC as the system primary power this cord may have to be
changed by a certified electrician for one or two cabinet installations. If using three or
more cabinets, a BPSB240 power strip is required and the power strip plug may have to
be changed by a certified electrician depending on local electric codes.
Table 7-4 Power Cabinet Hardware (continued)
Option Description