Toshiba Strata AirLink DK40i, Installation And Maintenance Manual

Page: 295 / 724

DK424i Installation
Step 5: Install Reserve Power
Strata DK I&M 6/00
7-33
DK424i Ins
tal
lation
Figure 7-18 Floor Mounting Cabinet Installation
Bolt Cabinets to Concrete Floor
1. Mount the DK424i Base Cabinet on
Floor Mount Fixtures (see Figures 7-17
and 7-19 ).Position the Base Cabinet at
the selected installation location.
2. Mark the floor where holes will be
drilled. Move the Base Cabinet prior to
drilling.
Note
Cover the Base Cabinet with a drop
cloth to protect the power equipment
from dust created during drilling.
3. Use a hammer drill to make holes for 3/8-
inch bolt anchors.
4. Install the bolt anchors, with plugs, in the
drilled holes.
5. Using the driving tool and a hammer,
drive each bolt anchor into the floor.
6. Move the Base Cabinet into position on the equipment room floor.
7. Secure the Base Cabinet to the floor using bolts, lock washers, and flat washers.
Note
RWBF (3-pairs) and BFIF Stands (1-pair) are supplied with floor installation kit BFIF.
BFIF
BFIF
BFIF
RWBFs are used on left and
right sides, wherever indicated
BFIFs are used on left and
right sides, wherever indicated
“A”
Front two
screws, left
and right sides
“B”
Back two
screws, left
and right sides
A B
A B
A B
A
A
A B
A B
A B
A B
RWBF
RWBF
RWBF
RWBF
B
B
RWBF
RWBF
RWBF
5007
Concrete
Floor
BFIF
(Floor
mount
fixture)
Bottom
Cabinet
Bolt
Lockwasher
Bolt Anchor
Plug
5242
Figure 7-19 Installation on Concrete Floor