Quick start guide
LS6475-2/LS6475-3/LS6476-4
Introduction
This quick start guide provides you with the basic installation
and use instructions. A limited set of features are described in
abbreviated form.
Please refer to the user’s manual for complete installation and
operation instructions
.
Telephone base and charger installation
Install the telephone base and charger as shown below.
Handset battery installation and charging
Install the battery as shown below. Once you have installed the battery,
you may be able to make and receive short calls. For best performance,
charge the handset battery continuously for at least 10 hours.
Plug the battery connector
securely into the socket
inside the handset battery
compartment, matching the
color-coded label.
1.
Place the battery with the
label
THIS SIDE UP facing
up and the wires inside the
battery compartment.
2.
Slide the battery compartment
cover towards the center of the
handset until it clicks into place.
3.
Place the handset in the
telephone base or charger
to charge.
4.
Telephone settings
Default settings are indicated by asterisks (*).
Screen display
Function
Options
LCD language
Set the screen display language.
English*
Français
Espa
ň
ol
Annc Caller ID
Enable the telephone base and/or
the handset to announce the
incoming caller ID information.
On*
Off
Clr voicemail
Turn off the
voicemail indicators.
Turn off
indicator?
Rename handset Change the name of each
registered handset.
HANDSET____
Key tone
Adjust the key tone volume whenever
a key is pressed, or turn it off.
*
Off
CID time sync
Enable the date and time to be set
by incoming caller ID information.
On*
Off
Home area code Enter your home area code if you dial
only seven digits for local calls.
_ _ _
Dial mode
Set the telephone to be tone or
pulse dialing.
Tone*
Pulse
Set date and time
Press
MENU/
SELECT
when the handset is not in use.
Scroll to
>Set date/time, then press
MENU
/SELECT.
Press or to set the month, then press
MENU/
SELECT.
-OR-
Use the dialing keys (
0-9) to enter the current month.
Repeat Step 3 to set the correct date and year and then press
MENU/
SELECT to advance to set the time.
Repeat Step 3 until the time is set. Press or to select
AM or
PM, or press 2 for AM or 7 for PM.
Press
MENU
/SELECT to save.
Ringer volume (telephone base)
Press
/VOL or /VOL on the side of the telephone base to adjust
the ringer volume when the telephone is not in use.
Ringer volume (handset)
Press
MENU/
SELECT
when the handset is not in use.
Scroll to
>Ringers, then press
MENU
/SELECT.
Press
MENU
/SELECT to select >Ringer volume.
Press or to sample each volume level, then press
MENU
/SELECT to save your selection.
Ringer volume (headset)
Press
+/-/VOLUME on the side of the headset when it is not in use.
Telephone operation
Make a call
Press
/FLASH
or
/SPEAKER, then dial the telephone number.
Press on the headset to join the call.
-OR-
Predial by first dialing the telephone number and then press
/FLASH
or
/SPEAKER.
Press on the headset to join the call.
1.
2.
3.
4.
5.
6.
•
1.
2.
3.
4.
1.
2.
1.
2.
/ /VOLUME
Review the directory
when the telephone is not
in use.
Scroll up while in a menu.
Increase the listening
volume during a call or
message playback.
Move the cursor to the
right when entering
numbers or names in the
directory.
MUTE/DELETE
Mute the microphone
during a call.
Delete the displayed entry
while in the directory,
caller ID log or redial list.
Silence the ringer
temporarily while the
handset is ringing.
Delete digits or characters
while using the dialing keys.
/FLASH
Make or answer a call.
Answer a call waiting call
during a call.
1
Press repeatedly to add
or remove 1 in front of the
caller ID log entry before
dialing or saving it to the
directory.
OFF/CANCEL
Hang up a call.
Silence the ringer
temporarily while the
handset is ringing.
Press and hold to delete
the missed call indicator
while the telephone is
not in use.
Press to return to the
previous menu, or
press and hold to return
to idle mode without
making changes.
Dialing keys
Enter numbers or
characters.
# (pound key)
Press repeatedly to
show other dialing
options when reviewing
a caller ID log entry.
Switch the name order
when saving the caller
ID log entries to the
directory.
CID/ /VOLUME
Review the caller ID log when
the telephone is not in use.
Scroll down while in a menu.
Decrease the listening volume
during a call or message
playback.
Move the cursor to the left when
entering numbers or names in
the directory.
CHARGE light
On when the handset is
charging.
EQ
Change the audio quality to
best suit your hearing during
an outside call, intercom call,
message or announcement
playback.
REDIAL/PAUSE
Review the redial list.
Press and hold to insert a dialing pause
while dialing or entering numbers in the
directory.
/SPEAKER
Make or answer a call using the
handset speakerphone.
Switch between the speakerphone
and the handset during a call.
Switch to tone dialing
temporarily while on a call.
IN USE light
Flashes when there is an
incoming call, or another
telephone sharing the
same line is in use.
Flashes when the
handsets/headsets are
being deregistered.
On when the phone is
in use, or the answering
system is answering a call.
On when a handset/
headset is being
registered.
X/DELETE
Delete the message currently playing.
Press twice to delete all old messages
when the telephone is not in use.
Message window
Shows the number
of messages and
other answering
system information.
/FIND HANDSET
Page all handsets
and the headset.
/SKIP
Skip to the next
message.
/PLAY/STOP
Play massages or stop
message playback.
/ANS ON/OFF
Turn the answering
system on or off.
/REPEAT
Repeat a message or press
twice to play the previous
message.
Handset overview
Telephone base overview
MENU/SELECT
Show the menu.
Choose an item, or save an
entry or setting while in a menu.
PUSH TO TALK (PTT)
Begin a one-to-one or
one-to-group broadcast.
®
CHARGE light
remains on when
charging.
Headset charging
After installing the telephone base, charge the headset as shown
below. The headset is fully charged after three hours of continuous
charging. If the
light does not turn on while charging, you need
to charge the headset without interruption for at least 15 minutes to
give the headset enough charge to use for a short time.
Place the tip of the headset in the small cradle on the
telephone base.
1.
The magnet holds the top of the headset in place. The light
turns on when charging.
2.
The
light
Telephone
wall jack
Telephone
line cord
If you have
DSL high
speed Internet
service, a
DSL filter (not
included) is
required.
Telephone base
power adapter
Telephone base
Electrical
outlet not
controlled by
a wall switch
Electrical outlet
not controlled
by a wall switch
Charger
adapter
Charger
Using the menu
To enter the handset menu:
Press
MENU/
SELECT
when the telephone is not in use.
Press or until the screen displays the desired feature menu.
Press
MENU/
SELECT to enter that menu.
To return to the previous menu, press
OFF
/CANCEL.
To return to idle mode, press and hold
OFF
/CANCEL.
1.
2.
3.
•
•
MUTE/FLASH
Mute the microphone while
on a call.
Press and hold to answer
an incoming call when you
receive a call waiting alert
during a call.
Silence the ringer in the
earpiece temporarily when
the headset is ringing.
+/-/VOLUME
Adjust the
listening volume
while on a call.
Adjust the
ringer volume
when the
headset is not
in use.
Rotating clip
Connect the
ear hook or
head band.
RESET inset
button
Insert a paper
clip or similar
object to reset
the headset when
deregistration fails.
Microphone
Earpiece
Headset overview
(on/off)
Press and hold two seconds
to power on or off.
Answer, end or join a call.
/VOL/
Adjust the
base ringer
volume or
the speaker
volume.
