![background image](http://html1.mh-extra.com/html/ooma/linx-700-0120-501/linx-700-0120-501_quick-start-manual_1639040001.webp)
Quick Start Guide
700-0120-501
Step 2
Step 1
Getting Started
Quick Reference
The Ooma Linx device allows you to connect remote
telephones and other telephony devices to your Ooma base
unit. Since the Linx operates wirelessly, it can be installed
anywhere within range of your base unit.
To complete the setup process, you will need the following:
Plug in the Linx device
To register your Linx device with your Ooma base unit,
find a power outlet located close to or in the same room
as your Ooma base unit. Plug the Linx in. The system
status indicator should light up amber and then begin to
blink as it looks for a base unit to register with.
Connect your phone to the Linx
Your Linx is now ready to be installed anywhere in your
home. Move the Linx to a power outlet close to the phone
or telephony device you want to connect it to. Plug the Linx
in and verify that the system status indicator turns blue
after a few seconds.
Using your existing telephone cord, plug your telephone or
telephony device into the phone jack at the bottom of the
Linx device.
Put your base unit in registration mode
Press the Page key on your Ooma base unit and hold it
down for three seconds. The Linx should detect the base
unit and register. Once it is is connected, the system status
indicator will turn blue.
NOTE: The Linx device may require a software upgrade the
first time it is connected. While it is upgrading, the system
status indicator on the Linx will blink blue and amber.
DO NOT UNPLUG THE LINX WHILE IT IS UPGRADING.
Go to
Step 1
Go to
Step 2
Go to
Step 3
System status indicator
•
Lights up blue when
connected to the base unit.
•
Lights up amber when it
does not detect the base.
•
Blinks amber when it is
attempting to register with
a base unit.
•
Blinks blue and amber
during a software upgrade.
Line status indicator
•
Lights up blue when the
line is idle
•
Lights up amber when the
line is in use.
Reset pinhole
Used to factory reset the Linx
device.
Telephone jack
Connect your device to the
Linx with a standard telephone
cable (not included).
Front view
Bottom view
Ooma Linx
Telephone cable
(not included)
Step 3
Congratulations, you’re done!
You’re all set! Your telephone (or telephony device) is
now connected to your Ooma system. Pick up the phone
connected to the Linx. Hear the melodious dialtone? That’s
the sound of Ooma.
Dial now!
IMPORTANT:
If you are connecting an alarm
system to the Linx, you must complete your setup
online at
my.ooma.com/linx
.
IMPORTANT:
If you are using the Linx
with an Ooma Office system, please go to
office.ooma.com/base_stations
, click Register New
Device and follow the directions on the screen. For
detailed instructions see
ooma.com/office-linx-setup
.
1
3
5
2
4
6
What this Warranty Covers. Ooma agrees to provide a limited warranty to the holder
of a valid proof of purchase (“Consumer” or “you”) that the Ooma Linx contained in this
package (“Product”) is free from material defects in material and workmanship, subject
to the exclusions noted below. This limited warranty extends only to the Consumer for
Products purchased and used in the United States of America or Canada.
What Ooma Will Do. During the warranty period, Ooma or its authorized service
representative will repair or replace, at its option, without charge, a Product which is
found to be materially defective in materials or workmanship and returned to Ooma.
Ooma, at its option, may use new or refurbished replacement parts to repair the Product,
or may replace the Product with a new or refurbished product having the same or
similar function.
How Long this Warranty Lasts. This limited warranty shall expire one (1) year from
the date of the Product purchase. Replacement or refurbished parts and products are
warranted for the original Product warranty period. This warranty terminates if you sell
or transfer your Product.
What this Warranty Excludes. This limited warranty does not cover: (a) the cost of
shipping and handling for returned and replacement products, or damage or loss during
shipment for warranty service; or (b) any software (which is governed exclusively by the
licensing terms of such software); or (c) any Product that has been subjected to misuse,
accident, shipping or other physical damage, improper installation, abnormal operation
or handling that is contrary to operation instructions, neglect, acts of god, inundation,
fire, water or other liquid intrusion, or force major; or (d) any Product that has been
damaged due to repair, alteration, or modification by anyone other than an authorized
service representative of Ooma; or (e) any Product to the extent that the problem
experienced is caused by signal conditions, network reliability or cable or antenna
systems; or (f) any Product whose identifying information has been removed, altered or
rendered illegible; or (g) any Product purchased, used, serviced, or shipped for repair
from outside the United States or Canada, or that is returned without a valid proof of
purchase; or (h) any indirect or consequential harm caused as a result of any defect or
failure of the Product to properly operate, including without limitation lost data or inability
to communicate.
How to Get Warranty Service. To obtain warranty service, call Customer Support
toll-free at 1-888-711-6662 (USA) or 1-866-929-6662 (Canada) for detailed information,
including instructions on how and where to return your Product and on any applicable
costs associated with a repair, replacement or exchange. You may be required to provide
proof of purchase before obtaining warranty service, and it is your sole responsibility to
maintain such proof (e.g., a sales receipt). Returned products that are determined not to
be materially defective will be subject to a handling fee. If you disagree with any of our
decisions with respect to warranty service, you have the right to contest that decision as
permitted under applicable laws and regulations.
How State Law Applies. This limited warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
Limitation on Liability. THIS WARRANTY IS THE COMPLETE AND EXCLUSIVE
WARRANTY AGREEMENT FOR THE PRODUCT BETWEEN YOU AND OOMA. NO ONE
IS AUTHORIZED TO MAKE MODIFICATIONS TO THIS LIMITED WARRANTY AND YOU
SHOULD NOT RELY ON ANY SUCH MODIFICATION. OOMA RESERVES THE RIGHT TO
CHANGE ITS LIMITED WARRANTY WITHOUT PRIOR NOTICE FOR FUTURE SALES.
OOMA DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO ITS PRODUCTS,
WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, COURSE OF DEALING, TRADE USAGE OR PRACTICE OR THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-
INFRINGEMENT OF THIRD PARTY RIGHTS. MOREOVER, OOMA SHALL NOT BE LIABLE
FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL
DAMAGES OF ANY NATURE ARISING OUT OF, OR IN CONNECTION WITH, THE LIMITED
WARRANTY OR THE USE OR PERFORMANCE OF ANY PRODUCT, WHETHER BASED
ON CONTRACT OR TORT, INCLUDING NEGLIGENCE, OR ANY OTHER LEGAL THEORY,
EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE TOTAL
AGGREGATE LIABILITY BY OOMA FOR DAMAGES OF ANY NATURE, REGARDLESS
OF FORM, ACTION OR FORESEEABILITY, SHALL IN NO EVENT EXCEED THE AMOUNT
PAID BY YOU TO US FOR THE PRODUCT UPON WHICH LIABILITY IS BASED. SOME
STATES AND/OR COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND/
OR EXCLUSIONS MAY NOT APPLY TO YOU. IF SUCH IS THE CASE, TO THE EXTENT
PERMITTED BY APPLICABLE LAW, OOMA LIMITS THE DURATION OF ANY IMPLIED
WARRANTIES TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY.
What the FCC wants you to know
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation. Privacy of communication may not be ensured when using this device.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against producing harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Try moving your Ooma base unit and Ooma Linx away from devices that may generate
interference, including: computers, wireless devices and electrical appliances
(such as microwaves).
Changes or modifications to this equipment not expressively approved by the party
responsible for compliance, or operation of this product in any way other than as detailed
to by the User Manual could void the user’s authority to operate this equipment.
To insure the safety of many users, the FCC has established criteria for the amount of
radio frequency energy various products may produce depending on their intended use.
This product complies with FCC radiation exposure limits under the following conditions:
• The base must be placed to allow a minimum of 20 cm (8 inches) between the antenna
and all persons during normal operation.
• The base must not be collocated or operated in conjunction with any other antenna or
transmitter.
Industry Canada Notice
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions; (1) this device may not cause harmful
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivants:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Safety Information
When using telephone equipment, including the Ooma Linx, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, damage to equipment,
loss of property, severe injury to persons or even loss of life, including the following:
• Do not use this equipment and all related accessories near or under water, for example,
near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, near a
swimming pool, under the rain, do not plunge any parts in water or any other liquid.
• Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning.
• Do not insert the product into an extension cord, receptacle or outlet unless the prongs
can be fully inserted, failure to do so may cause electric shock or excessive heat resulting
in a fire.
• Do not overload power outlets and extensions cords, otherwise it can result in fire or
serious electrical shock.
• To prevent overheating, situate all parts of the product away from heat sources such as
radiators, heat registers, stoves, or other fixtures, appliances and products that produce
heat or any area where proper ventilation is not provided.
• Unplug with caution the product from power outlets if it emits smoke, an abnormal smell
or makes unusual noise. These conditions may cause fire or electrical shock.
• Do not disassemble the device, it contains no user-serviceable parts.
• Unplug the product from any power outlet before cleaning. Do not use liquid or aerosol
cleaners, use a damp cloth or a microfiber cloth for cleaning.
• Unplug the product from the power outlet if the cable or power adapter prongs are
damaged or frayed, if liquid has been spilled onto the product, if the product has been
exposed to rain, water or any other liquid, if the internal components of device are
exposed.
• Do not use the product to report a gas leak in the vicinity of the leak as it could
ignite the gas.
• The device is intended to be correctly oriented in a vertical or floor mount position,
the prongs are not designed to hold the power adapter in place if it is plugged upside
down, for example do not use facing down power outlets on a ceiling, under a table
or in a cabinet.
Copyright Information
© 2016 Ooma, Inc. All rights reserved. Reproduction in whole or in part without written
permission is prohibited. Ooma, the Ooma logo, Ooma Telo, Ooma HD2 Handset, Ooma
Linx, Ooma Premier, Ooma Office and all other Ooma company, product and service names
and slogans are trademarks of Ooma, Inc. All other product, service or brand names are the
property of their respective owners. Patent pending.
The phone connected to my Linx device doesn’t get a dial
tone
•
If the system status indicator is lit steady amber, try moving the Linx
closer to the base unit.
•
If the system status indicator is blinking amber, go to
ooma.com/linx-setup
for instructions on how to register the
device with the base unit.
•
Verify that your Ooma base unit is powered on and working properly.
The system status indicator
(see diagram on page 6)
should be lit
blue.
My Linx won’t register with my Ooma base unit
•
Move the Linx closer to your base unit and try to register again.
•
The Linx is not compatible with the first-generation Ooma Telo
Handsets. If you wish to disable your old handsets so you can use
the Linx device, dial
on a phone connected to
your Ooma Telo. The base unit will reboot automatically in a mode
that will support the Linx (and Ooma HD2 Handset, Ooma Safety
Phone, Ooma Headset). Ooma Telo Handsets will no longer work.
•
Your Ooma base unit supports up to four DECT devices. Ooma
Linx, HD2 Handset, Safety Phone, Headset are DECT devices,
which means you may only register a total of four of these devices.
How do I factory reset the Linx device?
•
To perform a factory reset on a Linx device, plug it into a power
outlet and then insert a paper clip through the reset pinhole (see
diagram on page 6) to press the reset switch until the system
status indicator blinks amber.
Warranty, Safety and Legal Notices
Ooma Premier is a suite of over 25 enhanced calling features that are
available on a subscription basis. A subscription to Premier gives you
access to features that help extend the capabilities of your phone to
serve a busy household. Premier subscribers have access to these
advanced features when they connect a telephone to the Linx:
Instant Second Line™
If someone else is on the phone, pick up any unused phone to get a
fresh Ooma dialtone and make a second call. If there’s already one
active call and you receive a second call, handsets connected to a
Linx device not currently in use will ring and can be answered normally.
Virtual Number
You can select a second phone number to assign to all phones in
your home, or just to the phone connected to a particular Linx device.
Select a number from a remote area code near your loved ones—now
they can call you for free too!
Private Device and Voicemail
Set up your new Linx device with its own phone line that can
ring separately from your main number. Configure this at
my.ooma.com/numbers.
Placing and receiving calls
To place a call, pick up the telephone that is connected to the Linx
device. You will hear the signature Ooma dialtone. Dial the number as
you normally would.
To answer a call, pick up your telephone or press the Talk button on
your phone.
Joining an existing call
Simply pick up the phone that is connected to the Linx device. When
you hear the Ooma dialtone, press the Flash button on your phone to
switch over to the call already in progress.
Call-waiting
Switch to a second incoming call by pressing the Flash button on your
phone when you hear the call-waiting beep. Your current call will be
automatically placed on hold. You can switch back to the original call
by pressing the Flash button again.
Caller-ID
When an incoming call rings on your Ooma Linx, you will see the
caller-ID associated with the caller on the display of the handset that is
connected to the Linx.
9-1-1 Calls
Calls to 911 will be routed to an emergency dispatch center. Please
make sure that your address with Ooma is always up-to-date, as this
information is used to determine your location in emergency situations.
Learn more about emergency calling with Ooma by visiting:
www.ooma.com/911
.
Basic Operation
Have a Question or Need Assistance?
Here is where you can look for help:
Knowledge base:
www.ooma.com/support
User manuals:
www.ooma.com/userguide
Community forum:
www.ooma.com/forums
Live Customer Care:
1-888-711-6662 (US)
1-866-929-6662 (Canada)
7
9
11
10
12
13
8
Ooma Premier
™
Troubleshooting