Tokyo Boeki Labmax 240, Service Manual

Page: 30 / 178

1‑12
1.4.5. Unit Layout of the First Floor
This drawing shows unit location fixed to lower chassis.
Fig. 1-13 Unit layout of the first floor
1. Power transformer Input voltage (AC100V, 115V or 230V.)
Output voltage (AC100V)
2. DP-2 Pump for reaction waste liquid and washing
trough waste water.
3. DP-1 Pump to aspirate reaction cuvette washing
solution and to degas from degasser.
4. Degasser Module to remove air in washing water.
5. Washing solution pre-heater Heater for reaction cuvette and probe
washing solution and for alkaline and acidic
washing solution.
6. Electromagnetic valve EV-3 Valve for switching piping lines of R1 and
R2 probes.
7. Electromagnetic valve EV-5
Valve for switching aspiration lines of dry
tips and degasser.
8. Electromagnetic valve EV-6 Valve for switching aspiration lines of WSH
and washing trough.
1 2 3
4
5
6 7 8