Tokyo Boeki Labmax 240, Service Manual

Page: 172 / 178

5‑32
5.7.3 Manual Auto Screen
1. Explanation of the screen
When clicking M.Auto button in the bottom of the manual function screen,
the following screen is shown.
This screen is used for programming a series of combined movements of manual
functions.
Notice
Programming is possible using this screen, but it might break the system if it is
something amiss with the program. So, use only the program which is provided
by the sales agency.
Manual Auto screen –1
1. Edit It is used to change the program which was already made.
When clicking, Manual Auto screen-2 is shown.
2. New It is used to make a new program.
When clicking, Manual Auto screen-2 is shown.
3. Start The selected program is performed.
4. Stop The program in action is stopped.
5. Exit When clicking, the screen returns to the manual function
screen.
Manual Auto 画面
Select
program.