Tokyo Boeki Labmax 240, Service Manual

Page: 25 / 178

Service Manual
Chapter 1
1‑7
1.4. Unit Layout
1.4.1. Unit Layout in the Front View
The drawing below shows front view when the front panel is removed.
Fig. 1-9 Front view
1. Reagent pump (RP) Consists of a pump to aspirate/dispense reagent and a
pump to wash the inside of reagent probe.
2. Sample pump (SP) Consists of a pump to aspirate/dispense sample and a
pump to wash the inside of sample probe.
3. Probe washing pump Washing water supply pump for the outside of reagent
and sample probes.
4. ISE pump Consists of a pump to pour calibrant into sample pot
and a pump to pour sample or calibrant on to electrode
and to drain.
5. Thermo module Module to control the temperature for regent tray.
1 2 3 4
5