Tokyo Boeki Labmax 240, Service Manual

Page: 155 / 178

Service Manual
Chapter 5
5‑15
5.6.3 STM-UD (Sample Probe - Up/Down)
1. Explanation of Function
2. INIT To move to the home position (Up position).
3. ADJUST To input the distance by the value and select the direction of
movement.
CW means Up, and CCW means Down.
4. DOWN -> DCELL To move from the down position to the reaction cuvette
(dilution position).
5. DOWN -> CELL To move from the down position to the reaction cuvette.
6. DOWN -> CUP To move from the down position to the inside or outside
sample cup.
7. DOWN -> ISE To move from the down position to ISE.
8. Move Speed * Move speed pulse rate
9. LS(STM) -> ON The liquid level sensor is turned ON.
10. LS(STM) -> OFF The liquid level sensor is turned OFF.
* shows that setting is not needed.
Manual Function (STM – UD)