Tokyo Boeki Labmax 240, Service Manual

Page: 152 / 178

5‑12
5.6 Outline of Manual Operation Screen
1. When clicking M.Function button in the enlarged sub-menu of Maintenance,
the following screen is shown.
The basic procedure of manual function is as follows.
Unit
→
Function
→
RUN
Unit (abbreviations) (units) (movement)
1. STF Sampler Rotation of sampler
2. STM-R STM Rotation Rotation of sample probe
3. STM-UD STM up/down Up/Down movement of sample probe
4. SP Sample pump
Aspiration/Dispensation movement of sample pump
5. RGT Reagent tray Rotation of reagent tray
6. RTM-R RTM rotation Rotation of reagent probe
7. RTM-UD RTM up/down Up/Down movement of reagent probe
8. SP Reagent pump
Aspiration/Dispensation movement of reagent pump
9. RCT Reaction tray Rotation of reaction tray
10. MU-1 Mixing unit-1 Up/Down movement of mixing unit-1
11. MU-2 Mixing unit-2 Up/Down movement of mixing unit-2
12. MP Mixing pump Movement of mixing pump
13. CWS Cuvette washing station Up/Down movement of reaction cuvette
washing station
14. CWP Cuvette washing pump
Aspiration/Dispensation movement of reaction
cuvette washing pump
15. PWP Probe washing pump
Aspiration/Dispensation movement of probe
washing pump
16. DP 1/2 Drainage pump-1, 2 Movement of drainage pump-1 and 2
17. Detector Colorimetry detector Not ready.
18. TEST ? Not ready.
19. EVS Electromagnetic valve Not ready
monitor
Manual Function screen
Sensor display
When it is ON,
the letters are
shown in red.
1. Selection
of unit.
2. Selection
of function.
3. Perform
function
.
For initialization
of all the units.
Click, when
operating with
“NO Safety”.
Sub-screens