TOHATSU BFT 250A, Service Manual

Page: 389 / 639

14-21
dummyhead dummyhead
CYLINDER HEAD
Apply engine oil to the spark plug tube [1].
Clean the cylinder head mating surfaces with a shop
towel or equivalent material.
Install the cylinder head cover by aligning the spark
plug tube seal with the spark plug tube.
Tighten the eight bolts (6 x 35 mm) in the numbered
order in two steps.
Install the removed parts in the reverse order of
removal.
Route the wire harness properly (page 2-19).
Install the following:
– Direct ignition coils (page 3-17)
– Intake manifold (page 5-76)
– L./R. engine under cover (page 6-3)
– Engine cover
[1]
6
2
3
8
7
4
1
5
PORT HEAD
STARBOARD HEAD
7
4
1
5
6
2
3
8