TOHATSU BFT 250A, Service Manual

Page: 135 / 639

5-13
dummyhead dummyhead
FUEL SYSTEM
ECM TERMINAL ARRANGEMENT
ECM CONNECTOR A (GRAY)
ECM side connector (viewed from the terminal side)
Termina
l No.
Terminal mark Name Content/Signal
1 – – –
2 ACGLP Alternator indicator lamp Alternator indicator lamp output
3 WARNL MIL MIL output
4 TDC2P CMP 2 sensor (+) CMP 2 sensor (+) input
5 TDC2M CMP 2 sensor (–) CMP 2 sensor (–) input
6 TE EBT sensor EBT sensor input
7 THL TP sensor TP sensor input
8 PB MAP sensor MAP sensor input
9 – – –
10 TACHO Tachometer Tachometer pulse output
11 K-LINE Communication signal Tester communication signal input/output
12 SVS IAB control solenoid IAB control solenoid output
13 FLR1 Fuel pump relay 1 Fuel pump relay 1 output
14 FLR2 Fuel pump relay 2 Fuel pump relay 2 output
15 IGN6 No.6 direct ignition coil No.6 ignition coil output
16 IGN4 No.4 direct ignition coil No.4 ignition coil output
17 PG3 Power ground 3 Power ground 3
18 O2HT O
2
sensor heater O
2
sensor heater output
19 BUZZ Warning buzzer Warning buzzer output
20 CRKP CKP sensor (+) CKP sensor (+) input
21 CRKM CKP sensor (–) CKP sensor (–) input
22 TOH1 EMT sensor 1 EMT sensor 1 input
23 TA IAT sensor IAT sensor input
24 TDC1P CMP 1 sensor (+) CMP 1 sensor (+) input
25 TDC1M CMP 1 sensor (–) CMP 1 sensor (–) input
26 FUP Fuel consumption meter Fuel consumption volume output
27 O2 HO2S HO2S input
28 ACGF Alternator FR signal Alternator FR signal input
29 TRMA Trim angle sensor Trim angle sensor input
30 TOH2 EMT sensor 2 EMT sensor 2 input
31 OPL Oil indicator light Oil indicator light output
32 OHL Overheat indicator light Overheat indicator light output
33 IGN5 No.5 direct ignition coil No.5 ignition coil output
34 IGN3 No.3 direct ignition coil No.3 ignition coil output
35 IGN2 No.2 direct ignition coil No.2 ignition coil output
36 IGN1 No.1 direct ignition coil No.1 ignition coil output