TOHATSU BFT 250A, Service Manual

Page: 335 / 639

11-13
dummyhead dummyhead
COOLING SYSTEM
Install a new impeller gasket [1] and impeller cover [2].
Apply marine grease to the pump liner [1] inner surface.
Install the pump liner in the impeller housing [2] by
aligning the two projections [3] on the pump liner with
the two grooves [4] in the impeller housing.
Be sure that part "A" [5] of the pump liner is in alignment
with part "B" [6] of the impeller housing.
Apply marine grease to a new water pump O-ring [1]
and install it into the impeller housing [2].
[2] [1]
[5]
[1]
[6]
[2]
[7]
[3]
[4]