TOHATSU BFT 250A, Service Manual

Page: 278 / 639

7-12
dummyhead dummyhead
CHARGING SYSTEM
If the rear bearing is removed, replace a new bearing
[1].
Apply grease to a new bearing inner surface.
Install a new rear bearing on the rotor shaft [2] using the
special tool as shown.
After installing the rear bearing, clean the rotor shaft
and slip rings [6] with a degreasing cleaning agent.
Install the rotor [1] to the stator (drive end housing) [2].
TOOLS:
Driver, 22 mm I.D. [3]
07746-0020100
Attachment, 17 mm I.D. [4] 07746-0020300
Attachment, 25 mm I.D. [5] 07746-0030200
[4]
[3]
[5]
[1]
[2]
[6]
[1]
[2]