Section 31: Remote Control Tab
T
ieline
Page 276
T E C H N O L O G Y
are displayed in the preceding image. Use this profile for sending program and
IFB.
31.8.
Gang to Knob
This feature allows the user to ‘gang’ inputs together. Any of
the input gain digipots on a codec can be ganged to each other
or to the
AUX
or
PHONE
inputs. This function allows the input
with the gang function selected to replicate any gain
adjustments via the selected digipot. This is particularly useful
for stereo audio sources or for sources with similar gain-setting
characteristics. If
Default
is selected no ganging is activated.
31.8.1.
Ganging in Remote Control
It is not possible to gang inputs of a master codec together and use this
function to control inputs remotely on a slave codec. However, if you have a
stereo source or two or more inputs which you would like to gang together
and control on the slave codec, this can be done at the remote (slave) codec.
Simply gang the inputs you would like controlled on the slave codec to a
single input that is being remotely controlled by an input knob on the master
codec.
Important Note on Aux Input Gain:
If you are using the
Aux
input on the codec and you want to adjust the gain of
the input there are two ways of doing it. You can use the virtual input fader
displayed in the
Control
menu for the codec, or alternatively you can use the
Gang to Knob
function in the
Rem Ctrl
menu and use one of the
INPUT
digipots to control the
Aux
input levels.
