Section 24: Connection Setup
T
ieline
Page 230
T E C H N O L O G Y
Remember to select a different
Codec channel
for each connection if you
are configuring two IP connections.
24.13.4.5.
X.21
When configuring X.21 connections only one
Port
is used for each X.21
module connection. The
X21 1<
connection on your codec will use
Port
1
and the
X21 2>
connection on your codec will use
Port 2.
Remember to select a different
Codec channel
for each connection if you
are configuring two X.21 connections.
24.14.
Phonebook Numbers
To select a phone number from the
Phonebook
menu, you first have to enter the
number and details with the
Phonebook Editor
within
Tool
Box
. (See the section
titled
Phonebook Editor
within this manual). Up to 80 phone numbers and
names can be stored in the configuration phonebook. To recall a stored phone
number from the phonebook, click on the right-hand side of the
Phbk#
selection
box as shown.
Once chosen, the name of the selected entry will be displayed in the
Name
box
and the phone number will be displayed in the
Number
box.
Phone numbers can also be manually entered by clicking on the
Number
box
and typing the numbers in. If you are using
Bonded POTS, ISDN
or
other
bonded connections, you will need to input a phone number for each individual
line to be connected. Please note that you can only recall numbers and type in
numbers for custom profiles, not manual default profiles.