Appendix 2: Connecting the Front Panel to the 1RU Codec
T
ieline
T E C H N O L O G Y
Page 365
Step 6:
To remove the front panel of the TLR 303, start by removing the Menu Selector
from the front panel. Turn the Menu Selector until you see the small hole in its side.
Insert a 2mm Allen key into the grub screw and undo it to release the Menu Selector
knob. Hold the knob as shown to prevent movement whilst undoing it. Be careful to
not rub the Allen key against the surface of the front panel as this may damage the
surface.
Step 7.
Set the wrench correctly, and ensure that the body of the wrench is not resting on the
front panel to prevent damage to it. Use the adjustable wrench to loosen the nut
around the Menu Selector shaft. Remove the nut and washer by hand.
