Section 9: Quick Start
T
ieline
Page 63
T E C H N O L O G Y
7.
Try to maintain a link quality (LQ) reading for your connection of between 70% and
100%.To negotiate higher bit-rates press “F2” then “3”; for lower bit-rates press
“F2” then “9”. For best performance, the dialing codec should be used to
renegotiate connection bitrates up and down. If you hear audio drop-outs the
current bit rate cannot be sustained and should be renegotiated down. To
disconnect, hang up your IP connection and then hang up the 3G connection.
8.
To disconnect, hang up your IP connection and then hang up the 3G connection.
9.
To change other 3GIP settings select
SOFTKEY 4 OK
and scroll to [Configuration]
> [GSM/3G Setup] > [3G Module].
Note on Cell-phone Use with Tieline USB Modules:
Turn on your 3G cell-phone and wait 30 seconds before you connect the phone to the
USB module via its USB cable (this cable should be available from your cell-phone
manufacturer). Within 30 seconds a
3GIP1
connection should appear on the main
codec connection
LCD
screen.
Cell-Phone Warnings
If you are unsure about the compatibility of a particular cell-phone or USB modem for
your region, check with your local
T
ieline
dealer or contact
T
ieline
at
[email protected] for more information. Alternatively, check the 3G section on our
website at www.tieline.com for a list of compatible devices.
