Appendix 2: Connecting the Front Panel to the 1RU Codec
T
ieline
T E C H N O L O G Y
Page 363
Important note:
Please take great care when changing front panels. If a panel is scratched or
damaged during disconnection or connection of the TLR 300 and TLR 303,
replacement of the damaged parts are at the owner’s cost.
Step 1.
Remove the top panel of the TLR 300. To do
this, remove the eight screws which hold this
panel in place with a size 3 pozi-drive
screwdriver.
Step 2.
Remove the four screws which hold the
front panel of the 1RU codec in place with
the size 4 pozi-drive screwdriver.
Step 3.
Carefully remove the front panel,
then unscrew the three screws
attaching the LED PCB to the
front panel with a size 3 pozi-
drive screwdriver.
