Section 17: Operation of your Codec
T
ieline
Page 108
T E C H N O L O G Y
17.10.
Initiating Manual Connections: Dialing a Number
This section describes how to dial over each of the various connections that are
available with
T
ieline
codecs – POTS, ISDN, GSM, IP, 3G/IP and X.21. For
more detailed information in relation to connections over each type of
connection, and using the various default profiles that are programmed into your
codec, please see the Quick Start section of this reference manual. It describes in
detail how to connect successfully.
17.10.1.
New POTS G3 Modules
T
ieline
has a new generation of POTS module called a POTS G3 module.
This supersedes the previous model which was simply called a POTS module.
Modules are clearly marked to delineate the two modules from each other.
Dialling displays are slightly different when using each different module and
the differences are outlined in the following sections.
For more information about the new POTS G3 module and its features,
please see the section titled POTS versus new POTS G3 Modules in the
POTS Operation section of this reference manual.
17.10.2.
Manual POTS Connections
The manual default mono profile is
loaded in the right-hand image. In
this example we will attempt to
connect with the connection
displayed as
POTS2> Enter#
.
1.
Use the
MS
to scroll to the
POTS2> Enter#
connection you want on the
codec startup
LCD
.
To select the number you wish to dial, either:
a.
Press the
MEMORY
key to get a number from the phone book; or
b.
Press the
ENTER/DIAL
key to display the last dialed number for
that connection; or
c.
Simply input the
number for the
destination codec using
the keypad. It should
display the telephone
number as shown in
the right-hand image.
2.
Press the
ENTER/DIAL
button on the keypad to make the call.
3.
Once the connection process
has completed, the connection
screen will be displayed as
shown - the bit rate of
connection and the Line
Quality of both codecs will be
ManDflt MonoPgm
[POTS1< Enter# ]
POTS2> Enter#
Aud Profile Wiz Menu
ManDflt MonoPgm
POTS1< Enter#
[POTS2> 55555555]
Aud Profile Wiz Menu
ManDflt MonoPgm
[POTS1< Enter# ]
[POTS2> 28.8 L91R89
Aud Menu