Tieline Commander G3 TLR300, Reference Manual

Page: 292 / 383

Section 33: Functions Tab
T ieline
Page 292
T E C H N O L O G Y
Table continued on the next page…
Continued on next page…
Category Source Key Trigger Description
POTS 1 & 2
cont…
Dis-
connected
When the modem disconnects a
User Function will be executed.
Ringing When the codec starts to call
and the ring tone is heard a
User Function will be executed.
IP 1 & 2 Strea-
ming
Activated When the codec begins
streaming audio a User
Function is triggered.
Deactivated A User Function is triggered
when audio streaming is
deactivated.
Any change A User Function is triggered
when audio streaming is either
activated or deactivated.
Bitrate Greater than The connection bit-rate can be
used to
Trigger
a User Function.
This menu setting allows the
User Function to be triggered
after surpassing a specified bit-
rate – this must be specified in
the
Parameter menu.
Less than
The connection bit-rate can be
used to
Trigger
a User Function.
This menu setting allows the
Function to be triggered after
falling below a specified bit-rate
– this must be specified in
Parameter
.
Status Connecting When dialing is initiated a User
Function will be executed.
Connected
When the codec connects a
User Function will be executed.
Dis-
connected
When the codec disconnects a
User Function will be executed.
Ringing When the codec starts to call
and the ring tone is heard a
User Function will be executed.
GSM 1 & 2 Strea-
ming
Activated When the codec begins
streaming audio a User
Function is triggered.
Deactivated When the codec is streaming
audio a User Function is
triggered when streaming is
deactivated.