Section 24: Connection Setup
T
ieline
T E C H N O L O G Y
Page 209
Important Connection Information:
Use only one phone number in the dialing section of the
Connection
menu if you
are using non-bonded connections. For example, if you are using two
connections that are not bonded (as you may for the
Man Dflt Mono/IFB
profile), create two connections using the
Connection No
drop-down menu and
input one phone number for each connection.
If you are connecting using a bonded connection, i.e.
Bonded POTS
or
Bonded
ISDN
, you will need to input multiple numbers into one connection. To do this
you will need to select the bonded
Connection type
you desire from the drop-
down menu. It is possible to dial up to two POTS and four ISDN numbers once
you select a bonded connection.
If you connect using the Connections Manager the codec will dial up to two
POTS and four ISDN numbers for you. If you connect manually after you have
loaded the information onto the codec, you will need to dial the numbers from
the codec via the displayed connections on the LCD screen.
24.4.
Dialing Bonded Mono Connections
Dialing bonded mono connections has never been simpler. Previously, if dialing
a bonded connection, a bonded profile needed to be selected. Now all you need
to do is select the
ManDflt MonoPgm
profile and if
T
ieline
codecs detect two
connections they will automatically be bonded to increase connection bandwidth.
Figure 66: List of Manual Default Profiles Displaying Connection Type Setting
