Tieline Commander G3 TLR300, Reference Manual

Page: 302 / 383

Section 33: Functions Tab
T ieline
Page 302
T E C H N O L O G Y
33.4.3. Object and Operation Menus
The next two menu selections for
Task Rule
,
Object
and
Operation
, will be
looked at together but in relation to relevant
Category
and
Type
settings. The
Object
menu sets the specific input, relay etc. and the
Operation
menu sets
the actual effect on that
Object
.
Table 19: Functions Menu - Object and Operation Menus
Category Type Object Operation Description
Alarms Piezo
Alarm
‘Grayed-
out’ and
inactive.
Beep 1-10
times or
forever.
The piezo alarm can be set to
beep between one and ten
times or until cancelled by the
operator.
Audio
Control Input
Type Inputs 1-5
Toggle
If set to Toggle , the User
Function will toggle the setting
through the list of mic input
level settings.
High Gain
Mic
Sets the mic input level to
High
Gain Mic
.
Med Gain
Mic Sets the mic input level to
Med
Gain Mic .
Low Gain
Mic Sets the mic input level to
Low
Gain Mic
.
Un-
balanced
Sets the mic input level to
Unbalanced Gain Mic
.
Line Level Sets the mic input level to
Line
Level mic gain.
Input
State
Inputs 1-6 Off The input will be switched off
when the User Function is
initiated.
On The input will be switched on
when the User Function is
initiated.
Toggle The input will toggle between
on and off each time the User
Function is executed.
Key The input will be on for the
duration a key is pressed i.e. a
SOFTKEY (The Activation Rule
Trigger
setting should be
Momentary
.)
Table continued on the next page…