Section 22: Matrix Editor
T
ieline
T E C H N O L O G Y
Page 187
Figure 54: The Matrix Editor Main Menu Page
22.4.
Activating the Matrix Editor
If you have purchased the
Matrix Editor
option, to activate it within the codec you
will need to input your 12 digit key into it to enable matrix functionality. To do
this please do the following:
First, you will need to access
Matrix Enable
menu within the codec.
Press
SOFTKEY 4
on the codec to access the
Menu
submenus;
Scroll using the
MS
to
Configuration
and press the
MS
to select it;
Then scroll to
Advanced
with the
MS
and select this option;
Scroll to
Matrix Enable
and select this option;
Select
Enable
and then enter the code that you have been given by
T
ieline
.
Your codec will now be enabled for matrix functionality.
22.5.
Matrices –Where Do I Start?
The
Matrix Editor
is the first stage of a three stage process that allows you to set
the routing of mixer functions within profiles for the
COMMANDER
G
3
. The
three stage process is as follows:
1.
Set the cross point connections for your matrices within the
Matrix
Editor
. This is where you set the individual signal path routing for
each mixer function of a profile within the codec; i.e. cue and talkback
functions and the inputs.
2.
Select which matrix will be attached to each mixer function listed
within the
Matrix Map
menu and save the settings to a profile.
3.
View and check your matrix settings within the
View Matrix
menu.
This allows you to view the overall mixer settings you have made
within the codecs.
