Section 38: Phonebook Editor
T
ieline
Page 339
T E C H N O L O G Y
38.3.1.
Programming a Codec to Speed Dial Phonebook Numbers Only
To program phonebook speed dialing press
SOFTKEY 4 Menu
and select
[Configuration] > [System Settings] > [Speed Dial Memory] > [Phonebook].
Press
CLEAR
several times to return to the main menu screen.
Ensure that the [ ] on the main codec screen are surrounding the connection
(e.g. POTS, ISDN, GSM, IP, 3G/IP or X.21) that you wish to connect with.
Now press the
MEMORY
button on the keypad and enter the number of the
phonebook entry to recall the stored phonebook number. Press
ENTER/DIAL
on the codec to dial this number.
38.3.2.
Programming a Codec to Speed Dial and Change a Profile
Simultaneously
To program phonebook and profile change speed dialing press
SOFTKEY 4
Menu
and select [Configuration] > [System Settings] > [Speed Dial Memory] >
[Profile]. Press
CLEAR
several times to return to the main menu screen.
Ensure that the [ ] on the main codec screen are surrounding the connection
(e.g. POTS, ISDN, GSM, IP, 3G/IP or X.21) that you wish to connect with.
Now press the
MEMORY
button on the keypad and the following screen will
appear.
Figure 104: Speed Dial Profile and Number Screen
If you know the number of the entry you require simply use the keypad to
recall the profile and dialing settings of that entry. If you would like to scroll
through the available entries, simply use the
MENU SELECTOR
to scroll
through the entries and select the one you require.
If your codec is already connected the following screen will appear on the
codec.
Figure 105: Hangup & Profile Change Confirmation Message
--Enter Speed Dial--
--Number or Scroll--
1
2 3
4
-Already Connected!-
Hangup all and speed
dial new profile?
No Yes
