Section 7: Functionality of the Commander G3 Rack Unit
T
ieline
Page 31
T E C H N O L O G Y
HEADPHONE or MONO
OUTPUT
Industry Standard 1/4”
(6.5mm) RTS headphone
output. Can also be
programmed to be a
balanced mono RTS
output.
Figure 2: Rear Panel of the Commander G3 1RU Rack Unit
ISDN/POTS/
GSM/X.21/3G
Expansion slots
for
interchangeable
T
ieline
modules.
CAN PORT
Allows users to add a
CAN 8+8 relay box
to the codec, or to
connect remotely to
the 2RU front panel.
POWER SUPPLY
AC IEC power input
accepts voltages from
90 to 264 volts.
USB & RJ 45 LAN
Connections
Connections for
configuration and
control by a PC
using
Tool
Box
Software
CONTROL PORTS
Two input control
ports and two opto-
isolated CMOS
contact closures for
remote control.
PROGRAM OUTPUT
Line level balanced
outputs that are
programmable with
the
T
ieline
Tool
Box
software or the PA
controls.
MIC IN
Mic or line level
input on Industry
Standard
¼
inch
(6.5mm) connector.
INPUT CONNECTORS
The codec has 2 inputs that will
handle inputs from -72 dBu to -15
dBu. These
MIC/LINE
inputs can
be configured using
Tool
Box
software and monitored via the
headphone output.
RS232 Connection
Allows connection of the
codec to a PC for configuring
codec settings with
Tool
Box
software. Can also be used to
connect to a GSM phone for
Bonded GSM.
