Section 10: POTS Operation and Usage Tips
T
ieline
Page 79
T E C H N O L O G Y
Important Configuration Note:
This setting is shared by the
Operating Mode
menu in the
GSM Landline
section of the
GSM LL/GSM/USB-3G
tab. In other
words, both sections named
Operating Mode
in these tabs change simultaneously
when either one is changed.
10.14.1.
Default Settings for POTS Voice Calls
By default, a POTS voice call is sent to a codec’s encoders as per the
connection profile loaded into the codec. This is a very useful way of
integrating voice calls into a broadcast and sending the composite program
signal to the studio encoded. The program matrix in this situation is as
displayed in the following image.
Figure 25: Phone Audio Routed to Encoder by Default (TLR300B Matrix)
In this situation audio is not sent to the analog codec outputs. Incoming
audio is sent to the
Encoder/s
and can be monitored via the
Mix
(Send/Return) Pan Matrix.
As displayed in the following image, phone
audio by default is routed to the
Send
section of
the matrix – along with the other inputs.
The
BALANCE
knobs on
T
ieline
codecs control
the balance between the
SEND & RETURN
audio sent to the codec headphone outputs. The
Mix (Send/Return) Pan Matrix
provides the
flexibility of selecting which sources are allocated
to
SEND
and
RETURN
.
The audio balance between the
Decoder
audio
monitored (via
Return
) and the inputs (via
Send
)
can be controlled via the
BALANCE
knob on a
T
ieline
codec.