Tieline Commander G3 TLR300 Reference Manual Download Page 159

Page: 159 / 383

Section 20:

Tool

Box

Operation

ieline

T E C H N O L O G Y

Page 159

Section 20

Section 20.

ToolBox Operation

This program will enable you to configure

ieline

codecs before and during field

deployment.

Tool

Box

software is used to create and load new custom user profiles

onto codecs. Profiles you create are saved in configuration files with a .cdc file

extension.

With

Tool

Box

software you can configure connections, change codec settings,

upgrade codec software, store telephone numbers, operate local and remote CMOS

relays and much more. It is also capable of controlling both local and remote codec
input levels while on air - from either end of the link.

20.1.

ToolBox

Software Downloads

Tool

Box

is a PC compatible software application that works with all

ieline

codecs, providing a convenient way to configure, remotely operate and monitor
them. Free updates of

Tool

Box

software can be downloaded from the

ieline

web site at http://www.tieline.com/support/software.html. To determine the
version of

Tool

Box

software you require for your codec, go to our website at

http://www.tieline.com/support/software.html and check for the most suitable
version to upgrade your codec.

If you are not sure what version of

Tool

Box

software you should be running,

regardless of whether you have a new G3 codec or an older G1 legacy codec,

simply navigate to [Menu] >[Unit Details] on your codec. The firmware version is
listed in this menu. Compare this to what version of

Tool

Box

is currently

available for downloading. Download the appropriate version of

Tool

Box

to your

PC and if you require an updated version of codec firmware, fill out the Upgrade

Request Form on our website at http://www.tieline.com/support/upgrades.html.

20.1.1.

Operating System Requirements:

We recommend that

Tool

Box

software be run on one of the following

operating systems: Windows

XP or 2000.

Please Note:

This software is not available for Apple

computers and

Windows

95 is not supported.

Tool

Box

software requires Internet Explorer

5.5 or higher.

Please Note:

Netscape

is not supported.

Windows

is a registered trademark of Microsoft Corporation in the United States and/or

other countries.

Apple

is a trademark of Apple Computer, Inc., registered in the U.S. and other

countries.

Netscape

is a registered trademark and the exclusive property of AOL Time Warner,

Inc., or their respective subsidiaries, divisions and/or related companies.

Summary of Contents for Commander G3 TLR300
































































































































































































































































































































































































Search results

Summary of Contents for Commander G3 TLR300

Reviews:

Related manuals for Commander G3 TLR300

Brands by name

Popular brands

Tieline Commander G3 TLR300, Reference Manual

Search results

Summary of Contents for Commander G3 TLR300

Reviews:

Related manuals for Commander G3 TLR300

Brands by name

Popular brands