Thermo Scientific Dionex ICS-2000, Operator'S Manual

Page: 267 / 390

Setting Up the Eluent Generator
Doc. 031857-03 4/06
B-63
3. Lift the EluGen
cartridge up slightly
from the EGC holder
and slide the EPM
bracket onto the side of
the holder (see
Figure B-62 ).
Figure B-62. EPM and Mounting Bracket Installed on EGC Holder
4. Connect the following lines to the EPM:
•
Connect the
TO CR-TC/EPM ELUENT OUT
line (yellow label) to
the
ELUENT OUT
port on the EPM (see Figure B-63 ).
•
Connect the
TO CR-TC/EPM ELUENT IN
line (red label) to the
ELUENT IN
port on the EPM.
•
Connect the
TO CR-TC/EPM REGEN IN
line (orange label) to the
REGEN IN
port on the EPM.
•
Connect the
TO CR-TC/EPM REGEN OUT
line (blue label) to the
REGEN OUT
port on the EPM.
EGC Cable