Integrated Bus
Operation manual POSIDYN® SDS 5000
ID 442289.06
WE
KEEP
THINGS
MOVING
95
11
11.4.2.1
The Network tab
After you open the assistant, the Network tab is selected. Select the gateway inverter in the list and double-
click this line. The
Network settings
dialog screen appears:
Fig. 11-9: The
Network settings
dialog screen
You can use this dialog screen to set how the IP address is to be obtained for remote maintenance, for
example. Remember that the settings must be made for the RJ45 socket (X3 A or X3 B) which is the gateway
to the network.
If a DHCP server exists in the network, check the checkbox of the socket and then decide whether to use the
DHCP standard
setting or the
Only DHCP
setting.
When you use the
DHCP standard
setting, the IP address must be entered manually if the DHCP server does
not provide an IP address within three minutes. If this does happen, enter the IP address and the subnet mask
manually in the fields below.
Fig. 11-10: Automatic provision of the IP address for X3 A with the
DHCP standard
setting
Summary of Contents for POSIDYN SDS 5000
Page 194: ...Notes WE KEEP THINGS MOVING ...
