Parameterizing motor data
Operation manual POSIDYN® SDS 5000
ID 442289.06
WE
KEEP
THINGS
MOVING
35
5
5.1
Selection in the configuration assistant
Proceed as shown below to select a STOBER standard motor in the configuration assistant:
Fig. 5-1: Motor selection in Step 5 of the configuration assistant
Information
In control type
0:V/f-control
, no current or torque limitation occurs. Also connection to a rotating
motor is not possible (capture).
Selecting the motor in the configuration assistant
1. Open the configuration assistant in POSITool.
2. Proceed up to step 5 motor selection.
3. Select your required motor from the list of motors (e.g. asynchronous motor 112 M Y 4 kW).
4. Close the assistant.
5. In POSITool select the parameter list and in parameter
B20
enter the necessary control mode (e.g.
1:Sensorless vector control
).
6. Go online and transfer the settings to the inverter.
7. Save the settings with
A00 Save values
.
The motor data and the control mode are correctly entered.
Summary of Contents for POSIDYN SDS 5000
Page 194: ...Notes WE KEEP THINGS MOVING ...
