manualshive.com logo in svg

Sony MVS-8000X SystemMVS-7000X System, User Manual

The Sony MVS-8000X System and MVS-7000X System are cutting-edge video production systems featuring advanced capabilities and remarkable performance. For a comprehensive understanding and seamless operation, you can easily access the detailed User Manual by visiting our website manualshive.com, where it is available for free download.

Share
Download
background image

USO 

RESTRITO

6 

Table of Contents 

 

Simple Transition .................................... 120

 

Basic Operations for Simple 

Transitions ....................................... 120 

Display of the Key Output Status and Key 

Priority ............................................. 121 

Split Fader ................................................. 121 
Independent Key Transitions With a Simple 

Transition Module ........................... 122 

Chapter 4  Keys

 

Overview .................................................. 123

 

Key Types ................................................. 123 
Key Modifiers ........................................... 124 
Key Memory ............................................. 125 
Key Default ............................................... 126 

Key Setting Operations Using

 

Menus ............................................... 126

 

Key Setting Menus .................................... 126 
Key Type Setting....................................... 127 
Selecting Key Fill and Key Source ............. 128 
Chroma Key Composition and Basic 

Settings ............................................ 130 

Key Adjustments (Menus) ...................... 131

 

Chroma Key Adjustments. ........................ 131 
Key Edge Modifications ............................ 134 
Masks ........................................................ 137 
Applying a DME Effect to a Key ............... 139 
Specifying the Key Output Destination ....... 141 
Key Modify Clear ...................................... 141 
Blink Function .......................................... 141 
Video Processing ....................................... 142 

Key Setting Operations with the Key 

Control Block ................................... 142

 

Selecting the Bank and Keyer .................... 142 
Selecting the Key Type.............................. 143 
Parameter Adjustment with the Knobs ........ 143 
Selecting Key Fill ...................................... 143 
Selecting Key Source ................................ 144 

Key Adjustments (Key Control          

Block). ............................................... 144

 

Key Edge Modifications ............................ 144 
Masks ........................................................ 146 

Applying a DME Effect to a Key ................ 146 
Other Key Setting Operations .................... 148 

Key Adjustments (Multifunction Flexi Pad 

Control Block) ................................... 149

 

Resizer ..................................................... 152

 

Two-Dimensional Transformations and 

Rotation of Keys .............................. 152 

Resizer Interpolation Settings .................... 155 
Resizer Crop/Border Settings .................... 155 
Applying Resizer Effects ........................... 156 
Setting rotation of the resizer...................... 159 

Key Snapshots......................................... 160

 

Key Snapshot Operations .......................... 160 
Key Snapshot Operations Using a Simple 

Transition Module ............................ 161 

Chapter 5  Wipes

 

Overview .................................................. 163

 

Types of Wipe Pattern ............................... 163 

Basic Procedure for Wipe Settings .......... 163

 

Wipe Settings Menu .................................. 163 
Wipe Pattern Selection .............................. 163 
Pattern Mix ................................................ 164 
Setting Wipe Modifiers ............................. 166 
Wipe Modify Clear .................................... 174 

Wipe Settings for Independent Key 

Transitions ........................................ 175

 

Basic Procedure for Independent Key 

Transition Wipe Settings .................. 175 

Setting Independent Key Transition Wipe 

Modifiers ......................................... 175 

Wipe Snapshots ....................................... 177

 

Wipe Snapshot Operations With the Flexi  

Pad ................................................... 177 

Wipe Snapshot Operations With the 

Menus .............................................. 179 

Wipe Pattern Operations in the 

Multifunction Flexi Pad Control    
Block .................................................. 180

 

Recalling a Wipe Snapshot ........................ 180 
Selecting the Wipe Pattern ......................... 180 
Editing the Wipe Pattern ............................ 180 

Summary of Contents for MVS-8000X SystemMVS-7000X System



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MVS-8000X SystemMVS-7000X System

ABB NAL Series Mounting And Operation Manual preview
NAL Series
Brand: ABB Pages: 32
ABB VUBB User Manual preview
VUBB
Brand: ABB Pages: 44
ABB Sense7 Series Original Instructions Manual preview
Sense7 Series
Brand: ABB Pages: 15
Eaton Cutler-Hammer Quick Start Instructions preview
Cutler-Hammer
Brand: Eaton Pages: 8
H3C S1200 Series Compliance And Safety Manual preview
S1200 Series
Brand: H3C Pages: 90
Kramer VP-311DVI User Manual preview
VP-311DVI
Brand: Kramer Pages: 17
Digitronic CamCon DC30 User Manual preview
CamCon DC30
Brand: Digitronic Pages: 24
Grizzly G8988 Instructions preview
G8988
Brand: Grizzly Pages: 2
NETGEAR GS316P Installation Manual preview
GS316P
Brand: NETGEAR Pages: 8
Lindy CONNECTION PERFECTION 32797 User Manual preview
CONNECTION PERFECTION 32797
Brand: Lindy Pages: 10
Omron G3M Specification Sheet preview
G3M
Brand: Omron Pages: 8
Key Digital Champion KD-4X4XC Setup Manual preview
Champion KD-4X4XC
Brand: Key Digital Pages: 8
Theben TIMEGUARD IS3N-20 Installation & Operating Instructions preview
TIMEGUARD IS3N-20
Brand: Theben Pages: 2
Lucent Technologies 5ESS-2000 Operations And Maintenance Procedures preview
5ESS-2000
Brand: Lucent Technologies Pages: 1421
Wyrestorm MXV-0408-H2A v2 Quick Start Manual preview
MXV-0408-H2A v2
Brand: Wyrestorm Pages: 4
3Com 3C63400-3AC-C - PathBuilder S700 Switch Reference Manual preview
3C63400-3AC-C - PathBuilder S700 Switch
Brand: 3Com Pages: 272
G Trans KS-3002 User Manual preview
KS-3002
Brand: G Trans Pages: 11
Barco MatrixPRO User Manual preview
MatrixPRO
Brand: Barco Pages: 90

Brands by name

Popular brands

Load more brands