Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 149 / 706

USO
RESTRITO
Key Adjustments (Multifunction Flexi Pad Control Block)
149
Ch
a
p
te
r 4
K
e
y
s
applied and set the time for which the show key mode is
maintained after releasing the button in the Setup menu.
For details see “Settings for the Show Key Function” in
Chapter 20 (Volume 2).
Using the auto delegation function
To couple the selection in the key delegation buttons of the
independent key transition control block so that the key
control block delegation selection is automatically
Key Adjustments
(Multifunction Flexi Pad
Control Block)
This section describes basic key adjustment operations
when using the Multifunction Flexi Pad control block.
switched, in the key control block press the [AUTO
DELEG] button, turning it on.
EDIT ENBL button
Alphanumeric display
Returning the key adjustment values to
their defaults
Holding down a key type button ([LUM], [LIN], [CRK],
[CVK], or [PTN]) recalls the key default values
(page
126).
Key modify clear
When an M/E delegation button is held down, holding
down a key delegation button together returns the key
settings to the initial status settings.
Mode selection buttons
Adjustment knobs
For details of the initial status, see “Saving User-Defined
Settings” in Chapter 18 (Volume 2).
Region selection
buttons
Memory recall
section
Adjustment knob
displays
Notes
To select [M/E 4] or [M/E 5], a previous button assignment
in the Setup menu is required
(see page 396) .
Selecting the switcher bank and keyer
Before carrying out key adjustment, first select the key
adjust mode, then select the switcher bank and keyer.
For example, to adjust key 1 on M/E-1, proceed as follows.
1
In the Multifunction Flexi Pad control block mode
selection buttons, press [KEYADJ].
2
Press the [M/E 1] region selection button.
3
Press the [KEY SHIFT] button, turning it off.
4
In the memory recall section, press the [KEY1] button.
Notes
To select keys 5 to 8, in step
3
press [KEY SHIFT],
turning it on, then press one of buttons [KEY5] to
[KEY8] in the memory recall section to select the key.
The button displays in the memory recall section now
appear as shown in the following illustration.