Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 482 / 706

USO
RESTRITO
482
Snapshot Operations in the Menus
Ch
a
p
te
r 14
S
n
a
p
s
h
o
ts
See step 4 (page 479) in “Saving a snapshot in the
Multifunction Flexi Pad control block.”
3
Hold down the [DEL] button, then hold down the
button in the memory recall section displaying the
number of the corresponding register.
The button you pressed goes off, and this deletes the
snapshot.
Snapshot Operations in
the Menus
Operations in the Snapshot menu
You can also set snapshot or key snapshot attributes in the
Snapshot menu, which also displays the status of the
registers.
To access the Snapshot menu, press the top menu selection
button [SNAPSHOT] in the menu control block.
In the Snapshot menu, as well as setting snapshot
attributes, you can carry out editing operations on
snapshots, including copy and delete
(see page 485) .
Operations in the Misc >Snapshot menu
For M/E and PGM/PST snapshots only, you can carry out
saving, recalling, applying attributes, and so on using the
same menu (see page 485).
Selecting a Region or Reference
Region in a Menu
During snapshot operations, you can select a region in the
menu. This is convenient for selecting some of the regions
assigned to the numeric keypad control block or changing
the reference region.
For details of the operations, see “Selecting by menus”
(page 448).
Setting Snapshot Attributes
Applying snapshot attributes
1
In the Snapshot menu, press VF2 ‘Snapshot’ and HF1
‘Attribute.’
The Snapshot >Attribute menu appears.
The status area shows the region names, register
numbers, and the status and attributes set.
2
Press the region display in the upper part of the list to
display a selection window, then select the region in
the selection window. Selecting multiple regions is
also possible. To select all regions, press [ALL].
3
Press [OK].
The selected region name appears in the upper part of
the list.