Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 138 / 706

USO
RESTRITO
138
Key Adjustments (Menus)
Knob Parameter Adjustment Setting values
1 Position H Horizontal
position
–200.00 to
a)
2 Position V Vertical position –200.00 to
+200.00
a)
Knob Parameter Adjustment Setting values
1 Top Top position
–100.00 to
+100.00
2 Left Left position
–100.00 to
+100.00
3 Right Right position
–100.00 to
+100.00
4 Bottom Bottom position
–100.00 to
+100.00
5 Soft Box softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Edge softness 0.00 to 100.00
5 Pattern Pattern number
1 to 24
a)
Knob Parameter Adjustment Setting values
1 Angle Pattern angle
–100.00 to
a)
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Edge softness 0.00 to 100.00
Ch
a
p
te
r 4
K
e
y
s
1
In the M/E-1 >Key1 menu, select HF3 ‘Main Mask.’
The Main Mask menu appears.
2
In the <Mask Type> group, select the mask type.
Key Mask: Masks a part of a key.
Bkgd Mask: Masks a part of a background.
3
In the <Mask Source> group, select the mask source.
Box: signal from the dedicated box generator
Pattern: signal from the dedicated pattern generator
4
Set the mask source parameters.
When a box is selected
When a pattern is selected
a) The pattern is the same as a standard wipe. See “Wipe Pattern List”
in Appendix (page 357).
To select the pattern, display the Mask Ptn Select
menu by pressing [Mask Ptn Select] in the Main Mask
menu.
After selecting one of the patterns (standard wipe
patterns 1 to 24) displayed in the Mask Ptn Select
menu, you can adjust the following parameters.
5
To invert the black and white sense of the mask source,
press [Mask Invert], turning it on.
6
When a pattern is selected as the mask source, set the
pattern modifiers as required.
When turning [Position] on and setting the pattern
position
+200.00
a) See page 169 .
When turning [Multi] on and replicating the
pattern
Knob Parameter Adjustment Setting values
1 H Multi Number of
repetitions of
pattern
horizontally 1 to 63
2 V Multi Number of
repetitions of
pattern vertically 1 to 63
3 Invert Type Replication
layout
1 to 4
a)
a) See page 171 .
When turning [Aspect] on and setting the aspect
ratio of the pattern
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio
–100.00 to
+100.00
a)
a) See page 171 .
When turning [Angle] on in the <Rotation> group
and setting the angle of the pattern rotation
+100.00
a) See page 170 .
When turning [Speed] on in the <Rotation> group
and setting the rate of pattern rotation
Knob Parameter Adjustment Setting values
1 Speed Rate of pattern
rotation
–100.00 to
+100.00
a)
a) See page 170 .
Using the subsidiary mask
For example, to use the subsidiary mask for key 1 on the
M/E-1 bank, use the following procedure.
1
In the M/E-1 >Key1 menu, select HF4 ‘Sub Mask.’
The Sub Mask menu appears.