Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 423 / 706

USO
RESTRITO
Control of VTRs, Extended VTRs, and Disk Recorders
423
Ch
a
p
te
r 12
E
x
te
rn
a
l De
v
ic
e
s
CUE: Pressing this button cues the tape, disk or frame
memory clip automatically to the start point.
REW (rewind): Press this button to rewind the tape, disk
or frame memory clip.
PLAY: Press this button to play the tape, disk or frame
memory clip.
FF (fast forward): Press this button to fast forward the
tape, disk or frame memory clip.
ALL STOP: Press this button to stop all tape transport/
disk drive/frame memory operations.
Selecting a VTR/Extended VTR/disk
recorder
To select the VTR/Extended VTR/disk recorder to be
controlled, in the device selection buttons of the device
control block, press a selection of those buttons turning
them on.
For details on frame memory clip operations, see “Frame
Memory Clip Operations” in Chapter 7 (Volume 1).
Controlling the tape/disk transport
Using the buttons in the device control block, you can
control the tape transport or the disk transport.
For more details of the effect of buttons in VTR/disk
recorder operation mode, see “Device Control Block
(Trackball),” “Device Control Block (Joystick)” and
“Device Control Block (Search Dial)” in Chapter 2
To prevent overheating, if the search dial is on
continuously for 10 seconds, it is automatically turned off.
However, in this state, if a movement of the dial is
detected, it switches on again.
Jog mode
Press the [JOG] button, lighting the button amber, to
switch the dial to jog mode. In this mode, you can advance
material frame by frame at a speed proportional to the
rotation angle of the dial. To show a still image, stop
turning the search dial.
Reverse direction
Forward direction
Shuttle mode
Press the [SHTL] button, lighting the button amber, to
switch the dial to shuttle mode. In this mode, the playback
speed varies in steps according to the rotation angle of the
dial, to a maximum of 50 times normal. If the valid angle
is exceeded, the dial makes a clicking sound. To show a
still image, return the dial to the home position, where it
stops with a clicking sound.
(Volume 1).
If an appropriate setup setting has been made, VTR,
Extended VTR, or disk recorder can also be operated with
the transition control block (standard type or compact
type).
Reverse
direction
Low
speed Still image Low
speed
Forward
direction
For more details of the effect of buttons in VTR/disk
recorder operation mode, see “Transition Control Block
(Standard Type)” and “Transition Control Block
(Compact Type)” in Chapter 2 (Volume 1).
Maximum
speed
Variable mode
Maximum
speed
For details of settings in setup, see “Setting Transition
Control Block Button Assignments” (page 572).
Controlling the tape/disk transport with the
search dial
With the device control block, you can play back the
material on an external device in variable speed.
This section describes the three playback modes, taking
the device control block (search dial) as an example.
If you turn this dial during video playback, the direction
and speed of playback depend on the direction and angle
of rotation. To use this dial, press the [ENBL] button to the
upper right of the dial, lighting it amber. This dial has three
operation modes: jog, shuttle, and variable.
Press the [VAR] button, lighting the button amber, to
switch the dial to variable mode. In this mode, the
playback speed varies according to the rotation angle of
the dial from –1 to +3 times normal speed. The dial
indicates the positions where the playback speed is –1
times normal speed, +1 times normal speed, and +3 times
normal speed by making a clicking sound at those
positions. To show a still image (playback speed 0%),
return the dial to its home position, where it stops with a
clicking sound.