Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 43 / 706

USO
RESTRITO
Names and Functions of Parts of the Control Panel
43
Name Description
M/E
delegation Press one of the [M/E 1] to [M/E 5], and [P/P]
buttons to select the bank (an M/E bank or the
PGM/PST bank) to which the key control
block is delegated.
For details of [M/E 4] or [M/E 5] button
assignment, see
“Assigning a Button for M/E-
4 or M/E-5 Selection in the Setup
Menu”
(page 396) in Appendix.
Key
delegation Press one of the [KEY1] to [KEY8] buttons to
delegate the key control block to the
corresponding keyer.
For details of assignment of keys 5 to 8, see
“Assigning Buttons for Selection of Keys 5 to 8
in the Setup
Menu” (page 397) in Appendix.
TRANS
• By pressing this button, you can check the
DME channel used for DME wipes on the
M/E or PGM/PST bank.
• By pressing this button, then pressing one
of the DME channel selection buttons, you
can preset the DME channel to be used
when a DME wipe is selected as the
transition type for the transition.
• When presetting the DME channel for an
independent key transition, hold down this
button, then press one of the [KEY1] to
[KEY8] buttons, turning the two buttons on,
beforehand.
Name Description
AUTO SEL
(selection)
• Use the signal selected on the key fill bus,
and the paired key source signal. The
setting of key fill and key source pairs is
carried out in the Setup menu.
• To use the signal selected on the key fill bus
as key source (self keying), press the
[AUTO SEL] button and [SPLIT] button at
the same time, so that both are off.
SPLIT
• To use the signal selected on the key fill bus
as key fill, and a signal separate from the
signal assigned in a pair with key fill for key
source, press this button, turning it on.
• To select the signal on the key source bus,
hold down this button, and press a button in
the key 1 or key 2 row in the cross-point
control block.
• To use the signal selected on the key fill bus
as key source (self keying), press the
[AUTO SEL] button and [SPLIT] button at
the same time, so that both are off.
MATTE
FILL
• To use a color matte from the internal
generator as key fill, press this button,
turning it on. You can adjust the color matte
using the knobs.
• When this button is off, the signal selected
on the key fill bus is used as key fill.
Name Description
KEY DROP
• When the selected edge type is “normal”
and soft edge is off or when drop border or
shadow is selected, turning this button on
lowers the key fill and key source position
by four or eight scan lines as set in the key
menu. To select 4H or 8H, use the Key
menu.
• When the selected edge type is “normal”
and soft edge is selected or when border,
outline, or emboss is selected, this button
lights automatically.
Ch
a
p
te
r 2
M
e
n
u
s
and
Co
n
tr
o
l P
a
n
e
l
b
Key type selection buttons
Press one of these buttons, turning it on, to select the
desired key type.
Depending on the selected key type, various parameters
are displayed, and you can set the values with the knobs.
The following key types can be selected.
LUM: luminance key
LIN: linear key
CRK: chroma key
CVK: color vector key
PTN: key wipe pattern key
For details, see “Key Types” (page 123).
c
Key fill/key source selection buttons
Pressing the following buttons selects key fill and key
source.
d
Key modifier buttons
To add an edge modifier to the key, press one of these
buttons, turning it on.
Depending on the button pressed, parameters appear in the
displays, and you can set the values with the knobs.
To select a normal edge as the edge type, turn off the
[BDR], [DROP BDR], [SHDW], [OUTLINE], and
[EMBOS] buttons.