Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 247 / 706

USO
RESTRITO
Color Corrector Functions
247
Knob Parameter Adjustment Setting values
1 Video Gain Video signal
gain
–200.00 to +200.00
2 Y Gain Y signal gain
–200.00 to +200.00
3 C Gain Chrominance
signal gain
–200.00 to +200.00
4 Hue Delay Hue delay
–180.00 to +180.00
5 Black
Level Black level
–116.90 to +116.90
Knob Parameter Adjustment Setting values
1 Luminance Luminance
–7.31 to +109.59
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
4 Gain Key gain
–100.00 to +100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
Ch
a
p
te
r 9
Co
lo
r Co
rr
e
c
to
r
Adjusting the color of the specified region
(key)
1
In the CCR menu, press VF1 ‘CCR1’ and HF6 ‘Spot
CCR/Output.’
The Spot CCR/Output menu appears.
2
In the <Spot CCR> group, press [Spot CCR], turning
it on.
3
In the <Auto> group, press [Sample Mark], turning it
on.
Notes
When [Sample Mark] is on, the effects of color
adjustment outside the region of spot color adjustment
(see page 247) and output video processing (see page
248) are temporarily disabled.
Turning [Sample Mark] off restores the former state.
4
Adjust the parameters so that the color you want to
change is included within the sample mark.
Knob Parameter Adjustment Setting values
1 Position H Horizontal
position
–100.00 to +100.00
2 Position V Vertical
position
–100.00 to +100.00
3 Size Size 1.00 to 100.00
5
In the <Auto> group, press [Auto Start], to adjust the
key automatically.
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 0.00 to 100.00
8
In the <Spot CCR> group, press [Spot CCR] to display
the parameters, and adjust the replacement color.
.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To return the parameters to their default settings
In the <Spot CCR> group, press [Unity].
Masking a part of the spot color
adjustment
Set [Mask] to On in the Spot CCR/Output menu, then carry
out the same procedure as in
“Masking a part of the
primary color correction” (page 243) .
Adjusting the color outside the spot color
adjustment region
1
In the Spot CCR/Output menu, press [Outer Out Proc]
in the <Outer Out Proc> group, turning it on.
2
Adjust the following parameters.
Notes
This automatic adjustment does not carry out key gain
adjustment. If required, adjust the key gain as shown
in step
6
.
6
Press [Key Adjust], and adjust the following
parameters.
To return the parameters to their default settings
In the <Outer Out Proc> group, press [Unity].
Output Video Processing Operations
7
Press [Window], turning it on, to adjust the key
detection range for spot color adjustment.
The following corrections are available for the YUV
signal.
•
Video signal overall gain adjustment
•
Y signal gain adjustment
•
Y signal offset adjustment
•
C signal gain adjustment
•
C signal hue adjustment