manualshive.com logo in svg

Sony MVS-8000X SystemMVS-7000X System, User Manual

The Sony MVS-8000X System and MVS-7000X System are cutting-edge video production systems featuring advanced capabilities and remarkable performance. For a comprehensive understanding and seamless operation, you can easily access the detailed User Manual by visiting our website manualshive.com, where it is available for free download.

Share
Download
background image

USO 

RESTRITO

Table of Contents 

17 

 

Releasing the Assignment of a GPI Output 

Port .................................................. 644 

GPI Output Settings (GPI Output Assign 

Menu) ................................................ 644

 

Making DCU GPI Output Settings ............. 644 

Serial Port Settings (Serial Port Assign 

Menu) ................................................ 645

 

Making Serial Port Settings ....................... 645 
Making Detailed Settings on the External 

Device Connected to the Serial 
Port .................................................. 646 

Chapter 23  Setup Relating to Router 
Interface and Tally (Router/Tally)

 

Router Interface Settings (Router       

Menu) ................................................ 652

 

Assigning Switcher Inputs and Outputs to S- 

Bus Space ......................................... 652 

Setting External Boxes 1 to 12 ................... 653 

Tally Group Settings (Group Tally      

Menu) ................................................ 654

 

Wiring Settings (Wiring Menu)................ 654

 

Making New Wiring Settings..................... 654 
Changing the Wiring Settings .................... 655 
Deleting Wiring Settings ........................... 655 
Sorting Wiring Settings ............................. 655 

Tally Generation Settings (Tally Enable 

Menu) ................................................ 655

 

Making New Tally Generation Settings ... 655 
Modifying Tally Generation ...................... 656 

Deleting Tally Generation Settings ............ 656 

Tally Copy Settings (Tally Copy          

Menu) ................................................ 656

 

Making New Tally Copy Settings .............. 656 
Modifying Tally Copy Settings .................. 656 
Deleting Tally Copy Settings ..................... 657 

Parallel Tally Settings (Parallel Tally  

Menu) ................................................ 657

 

Making or Modifying Parallel Tally 

Settings ............................................ 657 

Deleting Parallel Tally Settings ................. 658 

Serial Tally Settings (Serial Tally        

Menu)................................................. 658

 

Setting or Changing the Serial Tally 

Settings............................................. 658 

Making the Serial Tally Source Address 

Settings............................................. 658 

Clearing a Source Address Setting ....................... 659 

Chapter 24  User Setup

 

Source Patch ........................................... 660

 

Sequence of Source Patch Operations ...................... 660 
Exporting a User Source Name File to the 

Memory Card ................................... 660 

Creating a Patch Table (Conversion       

Table) ............................................... 661 

Replacing Signal Pairs Using the Patch 

Table ................................................ 662 

Chapter 25  DIAGNOSIS

 

Checking the Communications

 

Status ................................................ 663

 

Communications Status Display ..................... 663 

Appendix (Volume 2)

 

Simple Connection of the MKS-8080/8082 

AUX Bus Remote Panel .................... 664

 

Procedure for Simple Connection ................... 664 
Setting Status of the MKS-8080/8082 in 

Simple Connection ........................... 664 

Macro File Editing Rules .......................... 665

 

Macro File Syntax ...................................... 665 
Syntax of Event and Continue         

Statements ........................................ 666 

File Name .................................................. 666 
Saving and Recalling a File ......................... 666 
Errors ......................................................... 666 

Summary of Contents for MVS-8000X SystemMVS-7000X System



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MVS-8000X SystemMVS-7000X System

CALIENT S320 Repair And Diagnostics Field Manual preview
S320
Brand: CALIENT Pages: 22
JDS Uniphase SCG Series User Manual preview
SCG Series
Brand: JDS Uniphase Pages: 37
Kramer VS-88DVI User Manual preview
VS-88DVI
Brand: Kramer Pages: 28
Zigen SW-42Plus User Manual preview
SW-42Plus
Brand: Zigen Pages: 40
Zigen SW-41Plus Quick Start Manual preview
SW-41Plus
Brand: Zigen Pages: 4
Murphy Temperature SWICHGAGE SPL Owner'S Manual preview
Temperature SWICHGAGE SPL
Brand: Murphy Pages: 4
Network Technologies VEEMUX SM-nXm-15V-LC Installation And Operation Manual preview
VEEMUX SM-nXm-15V-LC
Brand: Network Technologies Pages: 46
Avocent DSR Series DSR1030 Quick Installation Manual preview
DSR Series DSR1030
Brand: Avocent Pages: 8
X10 Anaconda Switcher VK68A User Manual preview
Anaconda Switcher VK68A
Brand: X10 Pages: 2
Silent Gliss 0913 Installation, Programming And Operation Instructions preview
0913
Brand: Silent Gliss Pages: 4
Sarowin HDSW0016M1 User Manual preview
HDSW0016M1
Brand: Sarowin Pages: 9
NTI UNIMUX-nXm-UHD Installation And Operation Manual preview
UNIMUX-nXm-UHD
Brand: NTI Pages: 69
Compaq StorageWorks SAN Switch Integrated/32 Installation And Hardware Manual preview
StorageWorks SAN Switch Integrated/32
Brand: Compaq Pages: 104
One Control Crocodile Tail Loop Setup preview
Crocodile Tail Loop
Brand: One Control Pages: 9
BluStream SW41HDBT Quick Reference Manual preview
SW41HDBT
Brand: BluStream Pages: 4
Labgear HDS3K User Manual preview
HDS3K
Brand: Labgear Pages: 8
J-Tech Digital JTD-3003 User Manual preview
JTD-3003
Brand: J-Tech Digital Pages: 13
Perle IDS-105FE Series Installation Manual preview
IDS-105FE Series
Brand: Perle Pages: 2

Brands by name

Popular brands

Load more brands