Sony MVS-8000X SystemMVS-7000X System, User Manual, Page: 659 / 706

USO
RESTRITO
Serial Tally Settings (Serial Tally Menu)
659
Ch
a
p
te
r 23
S
e
tu
p
Re
la
ti
n
g
to
Ro
u
te
r In
te
rfa
c
e
and
T
a
lly
(Ro
u
te
r/Ta
lly
)
3
Using any of the following methods, select the port bit
number.
•
Press directly on the list on the left of the status area.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knob.
Knob Parameter Adjustment Setting values
1 Bit No Bit selection 1 to maximum
value
4
Turn the knob to select the source address.
Knob Parameter Adjustment Setting values
2 Source
Addr Source address
selection 1 to 1024
5
Press [Source Address Set].
Clearing a Source Address Setting
To clear a source address setting for a particular
bit
In the Router/Tally >Serial Tally >Source Assign menu,
select the serial tally port and bit number
(see steps 2 and
3 in the previous item), then press [Clear].
This clears the source address setting for the selected bit.
To clear all source address settings
In the Router/Tally >Serial Tally >Source Assign menu,
select the serial tally port, then press [All Clear].
A confirmation message appears.
•
If you select “Yes,” this clears all source address settings
for the selected serial tally port.
•
If you select “No,” the clear operation is canceled.
To return all source address settings to the
default
In the Router/Tally >Serial Tally >Source Assign menu,
select the serial tally port, then press [Default Recall].
A confirmation message appears.
•
If you select “Yes,” this returns all source address
settings for the selected serial tally port to the default.
•
If you select “No,” the operation is canceled.