Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 211 / 706

USO
RESTRITO
Still Image Operations
211
Ch
a
p
te
r 7
F
ra
m
e
M
e
m
o
ry
1
In the Frame Memory menu, select VF3 ‘Reposition/
Lock’ and HF2 ‘Lock.’
The Lock menu appears.
2
In the frame memory selection area, select the FM
output
(see page 207).
3
Press [Lock], turning it on.
This fixes the currently selected frame memory output
image.
To release the lock, set [Lock] to off.
Continuously Capturing Still Images
(Record)
You can continuously capture (freeze) a sequence of input
video frames and store the sequence of the still images
over a specified time interval.
The name of each image recorded in this way consists of a
first character string followed by a second string.
First character string: A common part of name assigned
to all the still images captured in one record operation.
This string includes a maximum of four characters,
which can be specified using a menu before carrying
out the capture. The first string is automatically used
as the clip name when the images are treated as a frame
memory clip.
Second character string: A four-digit number (0000 or
greater), which is incremented each time a still image
is captured.
Notes
When using the record function to continuously capture
frames, it is not possible to use the mask function.
Continuously freezing input images and
writing to memory
1
In the Frame Memory menu, select VF1 ‘Still’ and
HF4 ‘Animation Record.’
The Animation Record menu appears.
2
Select the desired frame memory (see page 207) .
3
To use V/K mode, press [V/K Mode], turning it on.
4
Press a button in the frame memory folder selection
area, to select the folder to hold the freeze image
(see
page 207) .
Notes
The folder selected here is the destination folder for
writing the freeze image.
It is not possible to change the selection of this folder
after the following step
5 .
An orange bar appears on the selection button for the
destination folder.
5
Press [Record Enable], turning it on.
The signals of frame memory source buses 1 and 2 are
assigned to the pair of FMs selected in step
2
, the
recording function is now possible.
6
Input the file name if required.
Pressing [File Name] displays the keyboard window
and you can enter the first character string (up to four
characters) of the file name.
7
Set the recording time if required.
Pressing [Duration] displays the numeric keypad
window, in which you can enter the recording time in
the form of timecode.
If you set the recording time to zero, this uses all frame
memory in which storing is possible for recording.
8
If required, set video processing for the selected signal
(see page 208) .
9
Press [Record], to start recording.
When the recording time is set, recording stops once the time has elapsed.
10
Press [Stop] to stop recording.
Even if the recording time is set, you can still stop
recording before the set time has elapsed.
Recalling a Continuous Sequence of
Still Images (Animation)
You can use a continuous sequence of images captured
with the record function as keyframes to create an effect.
By executing this effect you can recall the continuous
sequence (animation).
Notes
•
For example, to create an effect using FM1, FM1 must
be assigned to a user region.
•
To execute the effect, you must assign the user region to
which FM1 is assigned to a region selection button in the
numeric keypad control block and the Multifunction
Flexi Pad control block.