Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 618 / 706

USO
RESTRITO
618
Signal Output Settings (Output Menu)
Ch
a
p
te
r 20
S
wi
tc
h
e
r S
e
tu
p
(S
wi
tc
h
e
r)
Signal Output Settings
(Output Menu)
For setup relating to signal outputs, use the Switcher
>Output menu.
To display the Output menu
In the Engineering Setup menu, select VF3 ‘Switcher’ and
HF3 ‘Output.’
The status area shows the output signal numbers and
names, and output signal phase for the signals output from
the Output 1 to 48 connectors.
The following functions are available here.
Notes
For a format converter dedicated output, Video Clip, V
Blank, Through, Safe Title, and 4:3 Crop settings are not
possible.
•
Output Assign: Assign the signals output from the
Output1 to 48 connectors.
•
Video Clip: Adjust the clip levels (White Clip, Dark
Clip, and Chroma Clip) for the output signals from each
of the Output1 to 48 connectors.
•
V Blank: Adjust the vertical blanking width for the
output signals from each of the Output1 to 48
connectors. The setting is the number of scan lines from
the reference blanking position of field 1 for the
particular format which should be masked.
•
Through: Enable or disable through mode. Through
mode can be enabled for AUX1 to 48 outputs, M/E and
PGM/PST program outputs, and clean output.
•
Safe Title: Enable or disable safe title, and carry out
settings for box 1 and 2, cross and grid.
•
4:3 Crop: Set the actual video image to be cropped to a
4:3 aspect ratio when an HD system has a screen aspect
ratio of 4:3.
•
FC Adjust: Set the format converter outputs.
•
Multi Viewer: Make settings for the two-channel multi
viewer.
Assigning Output Signals
To assign a signal to output from an output connector, use
the following procedure.
2
In the <Output Assign> group, select either of the
following.
[Re-Entry Source]: It is possible to make duplicate
assignments.
M/E-1 Output 1 to 6
a)
M/E-2 Output 1 to 6
a)
M/E-3 Output 1 to 6
a)
M/E-4 Output 1 to 6
a)
M/E-5 Output 1 to 6
a)
P/P Output 1 to 6
a)
M/E-1 to 5 Proc Video
P/P Proc Video
M/E-1 to 5 Proc Key
P/P Proc Key
DME Monitor Video
DME Monitor Key
Color Corrector 1 and 2
Undefined
Color Bkgd 2
Frame Memory 1 to 8
[Aux Bus]: It is not possible to make duplicate
assignments.
Preset
Edit Preview
AUX 1 to 48
a) M/E output signals selected in the M/E Output Assign menu.
3
Using any of the following methods, select the output
connector number and signal to be assigned.
•
Press directly on the list in the status area to make the
selection.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knobs.
Knob Parameter Adjustment Setting values
1 Output No Output connector
number
1 to 48
2 Source No Selection of
signal to be
assigned
1 to maximum
value
•
For output connectors not to be assigned, press
[Inhibit].
The selected signal appears in reverse video.
4
Press [Set] to confirm the assignment.
1
In the Switcher >Output menu, press [Output Assign].
The Output Assign menu appears.
The status area shows the output connectors and
assigned signals on the left, and a list of signals that
can be assigned on the right.
Setting the Output Signal
In the following adjustment/setting operations, use any of
the following methods to select the output signal before
making the setting.
•
Press directly on the list in the status area.