USO
RESTRITO
Creating and Editing Keyframes
455
Example of the image
change in the transition
mode
“Picture-in-picture”
(one-channel mode)
Example of the image
change in the transition
mode
“Compress”
First stroke
Second stroke
First stroke
Second stroke
Ch
a
p
te
r 13
K
e
y
fra
m
e
E
ffe
c
ts
Picture-in-picture (PinP):
one-channel or two-channel,
picture-in-picture transition mode
Compress:
a type of picture-in-picture, in which the new
image is the background, and the currently visible
image shrinks, and then expands to its original size
(see example in the next item).
Frame in-out (Frame I/O):
one-channel or two-channel,
frame in-out transition mode. When the first transition
completes, if you move the position of the image, you
can move it both horizontally and vertically.
Frame in-out H (Frame I/O H):
a type of frame in-out
mode, which is specified when creating a transition
effect in the horizontal direction.
The image movement is reflected at both the transition
start point and end point
Transition start
First transition
completion
point
Effect execution
Transition end
The operation is carried out according to DME wipe
patterns 1202, 1203, or 1204.
Frame in-out V (Frame I/O V):
a type of frame in-out
mode, which is specified when creating a transition
effect in the vertical direction.
The image movement is reflected at both the transition
start point and end point
Transition mode
“Compress”
The change in the image when the transition mode is set to
“Compress” is as follows, in comparison to the case of
Image created by interpolation
Background A
Background B
At the first transition completion point, if you move the
image with the positioner, the transition appears as in the
following figure.
First transition
completion
“Picture-in-picture.”
Transition start
point
Effect execution
Transition end
Image created by interpolation
Background A
Background B
State before modification
Transition mode
“Frame in-out”
In this mode, when the first transition has completed, you
can move the image with the positioner in both horizontal
and vertical directions, but the image position at the
transition start point and end point does not change.
The description is of an example of creating an effect such
as the following.
Transition mode
“Frame in-out H”
This mode is specified when creating a transition effect in
the horizontal direction.
In this mode, when the first transition has completed, you
can move the image with the positioner in both horizontal
and vertical directions. The image at the transition start
point and end point also moves.
The description is of an example of creating an effect such
as the following.
Summary of Contents for MVS-8000X SystemMVS-7000X System
