Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 581 / 706

USO
RESTRITO
Cross-Point Settings (Xpt Assign Menu)
581
Knob Parameter Adjustment Setting values
1
V/K Pair
No
Selection of
video and key
pair number 1 to 300
Ch
a
p
te
r 19
Co
n
tr
o
l P
a
n
e
l S
e
tu
p
(P
a
n
e
l)
Creating the main table
In the main table, a pair consisting of a video signal and a
key signal is assigned to each button number. You can also
assign the same signal to another button number at the
same time. Further, you can delete currently assigned
signals from the main table.
1
In the Panel >Xpt Assign menu or Panel >Xpt Assign
>Table Button Assign menu, press [Main, V/K Pair
Assign].
The Main, V/K Pair Assign menu appears.
The left of the status area shows the video and key
signal names, source number, and audio mixer cross-
points (machine numbers) currently assigned in the
main table. On the right is a list of the source numbers
and signals that can be assigned. When the shift button
is pressed, the number column is distinguished by
color.
For details of audio mixer cross-point assignment
operations, see “Setting the audio mixer cross-points”
(page 585).
2
Using any of the following methods, select the button
number.
•
Press an auxiliary bus control block cross-point
button.
The auxiliary bus control block is in selection mode,
only when the menu for cross-point button selection
is showing.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knob.
Knob Parameter Adjustment Setting values
3 Source No Selection of
source to be
assigned
1 to 326 (MVS-
8000X)
1 to 152 (MVS-
7000X)
5
Using the buttons in the <Xpt Assign> group, assign
the selected signal to the button number currently
selected in the main table.
Set: Delete the signal currently assigned to the
selected button number and make a new
assignment.
Insert: Move down one line the signal currently
assigned to the selected button number and
following signals, and make a new assignment.
Notes
When a button number upper than 121 is selected,
execution of “Insert” is impossible. The signal
assignments to button numbers upper than 121 cannot
be changed. When “Insert” is executed for any other
number, moving down of signals ends at number 120,
and the signals assigned to numbers upper than 121 are
maintained in their original lines.
To disable a button
In the Panel >Xpt Assign >Main, V/K Pair Assign menu,
select the button you want to disable, and press [Inhibit].
To delete any currently assigned signal
In the Panel >Xpt Assign >Main, V/K Pair Assign menu,
select the button corresponding to the signal you want to
delete, and press [Delete] in the <Xpt Assign> group.
Signal deletion is executed in accordance with the
selection in the <Assign> group, and the signal assigned to
the button number next to the selected button number and
following signals move up one line.
3
When assigning a video signal, press [Video] in the
<Assign> group. When assigning a key signal, press
[Key]. You can select a video signal and a key signal
at the same time.
Notes
[Video] and [Key] in the <Assign> group cannot be
turned off at the same time. At least the one or the
other is always on.
4
Use any of the following methods to select the signal
to assign.
•
Press directly on the list in the status area.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knob.
Notes
When a button number upper than 121 is selected,
execution of “Delete” is impossible. The signal
assignments to button numbers upper than 121 cannot be
changed. When a signal assigned to any other button
number is deleted, moving up of signals ends when the
signal assigned to number 120 has moved to number 119,
and the signals assigned to numbers upper than 121 are
maintained in their original lines.
Creating tables 1 to 14
When creating tables 1 to 14, in the same way as when
creating the main table, you can assign the same signal to
more than one button number, or delete currently assigned
signals. However, assignment of video and key
combinations is impossible.