Sony MVS-8000X SystemMVS-7000X System, User Manual, Page: 585 / 706

USO
RESTRITO
Cross-Point Settings (Xpt Assign Menu)
585
Ch
a
p
te
r 19
Co
n
tr
o
l P
a
n
e
l S
e
tu
p
(P
a
n
e
l)
1
In the Panel >Xpt Assign menu, using any of the
following methods, select the M/E bank or bus.
•
Press directly on the list on the left of the status area.
•
Press the arrow keys in the list on the left, to scroll
the reverse video cursor.
•
Turn the knob.
2
Press [Audio Follow].
“Enable” appears in the “Audio Follow” column.
Setting the audio mixer cross-points
To assign an audio mixer cross-point to a switcher cross-
[SHIFT] button moves
one to the left Button for side flags
enable/disable
point pair (video/key), carry out the following procedure.
1
In the Panel >Xpt Assign menu, press [Mixer Xpt
Assign].
The Mixer Xpt Assign menu appears.
2
In the list on the left, select the number for the setting.
3
In the list on the right, select the audio mixer cross-
point (machine number).
4
Press [Set].
The audio mixer number appears in the “Mixer Xpt”
column.
For details of side flag operations, see “Side Flag
Settings” in Chapter 10 (Volume 1).
1
In the Panel >Xpt Assign menu, press [Side Flags
Button Assign].
The Side Flags Button Assign menu appears.
2
Press [Side Flags Btn Assign], turning it on.
Assigning a Cross-Point Button to
Enable/Disable Side Flags
By assigning the side flag function to the rightmost button
in a cross-point button row, you can use this button to
enable/disable side flags for each of the M/E and PGM/
PST banks.
This setting applies to all of the M/E and PGM/PST banks.
When you make this assignment, the [SHIFT] button (the
button assigned to the shift function) is moved one to the
left.
Notes
If a macro attachment is set, when you assign the button to
the side flag function, the button numbers are offset, and
therefore when you press the button this does not execute
the macro. The settings, however, are maintained, so that
when you cancel the side flag assignment, the macro can
be accessed once more.