Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 156 / 706

USO
RESTRITO
156
Resizer
Knob Parameter Adjustment Setting values
1 Top Top edge
–100.00 to
+100.00
2 Left Left edge
–100.00 to
+100.00
3 Right Right edge
–100.00 to
+100.00
4 Bottom Bottom edge
–100.00 to
+100.00
5 All Four edges Value of Left
shown
Knob Parameter Adjustment Setting values
1 H Simultaneously
adjust width of
left and right
borders 0.00 to 12.00
(4:3)
0.00 to 16.00
(16:9)
2 V Simultaneously
adjust width of
top and bottom
borders 0.00 to 9.00
3 All Simultaneously
adjust width of
all four borders Value of H
shown
4 Density
Density of the
borders
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Inner Soft Border inner
softness 0.00 to 100.00
Ch
a
p
te
r 4
K
e
y
s
Knob Parameter Adjustment Setting values
2 V Simultaneously
adjust width of
top and bottom
borders 0.00 to 3.00
(4:3)
0.00 to 2.25
(16:9)
3 All Simultaneously
adjust width of
all four borders
Value of H
shown
4 Density Density of the
borders 0.00 to 100.00
HD format
To apply color to a border
1
In the <Border Mode> group of the Border/Crop
menu, press [Flat Color].
2
Adjust the following parameters.
To soften the inner edge of a border
1
In the Border/Crop menu, press [Border Soft].
2
Adjust the following parameters.
To apply a beveled light edge
1
In the <Border Mode> group of the Border/Crop
menu, press [Beveled Light Edge].
2
Adjust the following parameters.
3
Press [Border Soft].
4
Adjust the following parameters.
Knob Parameter Adjustment Setting values
1 Inner Soft Border inner
softness 0.00 to 100.00
2 Bound
Soft Border
boundary
softness 0.00 to 100.00
To apply a beveled color edge
1
In the <Border Mode> group of the Border/Crop
menu, press [Beveled Color Edge].
2
In the <Color Adjust> group, select the edges for
adjustment among the [Top], [Left], [Right], and
[Bottom] edges. To select all the four edges, press
[All].
3
Set the color parameters.
For details, see “To apply color to a border” (page
156)
4
Press [Border Soft].
5
Adjust the following parameters.
Knob Parameter Adjustment Setting values
1 Inner Soft Border inner
softness 0.00 to 100.00
2 Bound
Soft Border
boundary
softness 0.00 to 100.00
Applying Resizer Effects
For example, to apply effects to key 1 of the M/E-1 bank,
use the following procedure.