![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422313.webp)
A
UTHENTICATION
C
OMMANDS
4-91
authentication login
This command defines the login authentication method and precedence.
Use the
no
form to restore the default.
Syntax
authentication login
{[
local
] [
radius
] [
tacacs
]}
no authentication login
•
local
- Use local password.
•
radius
- Use RADIUS server password.
•
tacacs
- Use TACACS server password.
Default Setting
Local
Command Mode
Global Configuration
Command Usage
• RADIUS uses UDP while uses TCP. UDP only offers best
effort delivery, while TCP offers a connection-oriented transport.
Also, note that RADIUS encrypts only the password in the
access-request packet from the client to the server, while
encrypts the entire body of the packet.
• RADIUS and logon authentication assigns a specific
privilege level for each user name and password pair. The user name,
password, and privilege level must be configured on the authentication
server.
• You can specify three authentication methods in a single command to
indicate the authentication sequence. For example, if you enter
“
authentication login radius tacacs local
,” the user name and
password on the RADIUS server is verified first. If the RADIUS
server is not available, then authentication is attempted on the
server. If the server is not available, the local
user name and password is checked.
Summary of Contents for TigerSwitch 1000
