![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-1000/tigerswitch-1000_management-manual_1300422187.webp)
VLAN C
ONFIGURATION
3-139
-
Untagged
: Interface is a member of the VLAN. All packets
transmitted by the port will be untagged, that is, not carry a tag and
therefore not carry VLAN or CoS information. Note that an
interface can only have one untagged VLAN, which must be the
same as the Port VID. See “Configuring VLAN Behavior for
Interfaces” on page 3-141 for configuring PVID.
-
Forbidden
: Interface is forbidden from automatically joining the
VLAN via GVRP. For more information, see “Automatic VLAN
Registration” on page 3-131.
-
None
: Interface is not a member of the VLAN. Packets associated
with this VLAN will not be transmitted by the interface.
-
Trunk Member
– Indicates if a port is a member of a trunk. To add
a trunk to the selected VLAN, use the last table on the VLAN Static
Table page.
Web
– Click VLAN, 802.1Q VLAN, Static Table. Select a VLAN ID from
the scroll-down list. Modify the VLAN name and status if required. Select
the membership type by marking the appropriate radio button in the list of
ports or trunks. Click Apply.
Figure 3-62. Configuring VLAN Port Attributes
Summary of Contents for TigerSwitch 1000
