SNMP C
OMMANDS
4-125
snmp-server community
This command defines the SNMP v1 and v2c community access string.
Use the
no
form to remove the specified community string.
Syntax
snmp-server community
string
[
ro
|
rw
]
no snmp-server community
string
•
string
- Community string that acts like a password and permits access
to the SNMP protocol. (Maximum length: 32 characters, case
sensitive; Maximum number of strings: 5)
•
ro
- Specifies read-only access. Authorized management stations are
only able to retrieve MIB objects.
•
rw
- Specifies read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
Default Setting
• public - Read-only access. Authorized management stations are only
able to retrieve MIB objects.
• private - Read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
Command Mode
Global Configuration
Example
Console(config)#snmp-server community alpha rw
Console(config)#
Summary of Contents for TigerSwitch 1000
